The independent technical support site for all things networking!


Post a new topicPost a reply Page 1 of 10   [ 144 posts ]
Go to page 1, 2, 3, 4, 5 ... 10  Next
Author Message
 Post subject: RouterTech Firmware 2.97 Discussion
PostPosted: Thu Feb 09, 2012 11:55 pm 
RouterTech Team
RouterTech Team
User avatar

Joined: Fri Jan 20, 2006 11:30 am
Posts: 2651
Location: London
This is the place to discuss (thanks, suggestions, criticisms etc.) the v2.97 release of the RouterTech firmware, available for download here

For support, problems, bugs or other such firmware related questions or issues, please start a new thread

_________________
Kieran
"Indeed!"
Invaluable links: Forum Rules | Networking Guides | FAQ | Site Search | Forum Search <-- Use it or feel my wrath!
No support via PM, please ask your questions in the forum!


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Sat Feb 11, 2012 11:44 am 
Newbie
Newbie
User avatar

Joined: Wed Feb 11, 2009 12:23 pm
Posts: 9
Location: Parma, Italy
Thank you a lot for your work. Just intalled 2.97 with Google Chrome ---> no problem. All seem to be ok. Bye

_________________
Roper FlyNet ADSL 2/2plus Wireless 125 Mbps Router [ROADSL2P-WG]
RouterTech AR7WRD Custom Firmware ( v2.97 )
RouterTech_3.6.0D_20120130_2.97


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Sat Feb 11, 2012 7:41 pm 
Novice
Novice

Joined: Sat Mar 31, 2007 12:19 pm
Posts: 22
Installed on my D-Link 624t and works fine.
At [url][link removed][/url] you can download the self-extracting .exe to flash it.

[Admin note] RouterTech is an opensource project - so do what you want with under the terms of the applicable licences - but if you repackage it - provide your own support forums ...! http://www.hwupgrade.it/forum/showthread.php?t=1660026


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Mon Feb 13, 2012 10:39 am 
Regular
Regular
User avatar

Joined: Wed Feb 18, 2009 10:05 am
Posts: 52
Location: Germany, ES
Hi @ All,

can someone tell me which DSP/tiatm driver is included in the routertech-ar7rd-lite-1port-firmware-20120130 (2MB PSP version) ?
The dsp_drivers.txt only includes general information but no concrete information about the lite version especially for 2MB devices.

---edit--
i found the following information in the changelog of v2.93. Is this still valid ?
20. New "lite" versions of the non-wireless firmwares, for routers with 2mb flash and 8mb RAM. The lite versions use DSP/tiatm drivers v6.x, and do not have the following features: (a) mjproxy; (b) sft; (c) wakelan; (d) ftpfs; (e) usb; (f) upnp. If you don't need/want any of these, then you should go for the lite versions. The lite versions leave sufficient space for users to create 64kb (or even 128kb) minix partition.


der_Kief

_________________
| ADSL2+ | AR860 (Routertech) | WRT54GL (Tomato) | NSLU2 (Debian) |


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Mon Feb 13, 2012 12:24 pm 
RouterTech Team
RouterTech Team
User avatar

Joined: Wed Feb 01, 2006 10:22 pm
Posts: 12051
Location: England, the Centre of Africa
The lite versions have dsp7.0 - and this leaves enough space for a 64kb minix partition: see the history.html file in the 2.97 docs.

_________________
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.


Top
 Profile  
 
 Post subject: installed rr 2.97 successfully on huawei wa1003a
PostPosted: Mon Feb 13, 2012 12:57 pm 
Newbie
Newbie

Joined: Fri Jul 29, 2011 3:40 pm
Posts: 8
using pc tool 2.1 , i installed rr 2.97 successfully on huawei wa1003a ! working with no problems and works great! :lol:


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Mon Feb 13, 2012 1:23 pm 
Newbie
Newbie

Joined: Fri Jul 29, 2011 3:40 pm
Posts: 8
after rr 2.97 installation ,

in status-> product information ,

i get the following

Quote:
Model Number RouterTech AR7WRD
HW Revision none
Serial Number none
Ethernet MAC 00:e0:fc:32:98:c4
DSL MAC 00:E0:FC:32:98:C4
AP MAC


1.AP MAC is empty... how to set it manually , can anyone guide me?
2. dsl MAC and ethernet mac are same , should it be like that?


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Mon Feb 13, 2012 1:32 pm 
Regular
Regular
User avatar

Joined: Wed Feb 18, 2009 10:05 am
Posts: 52
Location: Germany, ES
thechief wrote:
The lite versions have dsp7.0 - and this leaves enough space for a 64kb minix partition: see the history.html file in the 2.97 docs.
Thanks for the info.
In the meanwhile i found this information in the firmware FAQ :oops:

Whats the reason that "only" dsp7.0 is integrated in the lite version and not dsp7.5 ? Are they bigger in size ?

der_Kief

_________________
| ADSL2+ | AR860 (Routertech) | WRT54GL (Tomato) | NSLU2 (Debian) |


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Mon Feb 13, 2012 6:21 pm 
RouterTech Team
RouterTech Team
User avatar

Joined: Wed Feb 01, 2006 10:22 pm
Posts: 12051
Location: England, the Centre of Africa
der_Kief wrote:
Whats the reason that "only" dsp7.0 is integrated in the lite version and not dsp7.5 ? Are they bigger in size ?
It's all about size - dsp7.0 is much smaller - that is part of the "Lite"ness.

_________________
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Mon Feb 13, 2012 6:25 pm 
RouterTech Team
RouterTech Team
User avatar

Joined: Wed Feb 01, 2006 10:22 pm
Posts: 12051
Location: England, the Centre of Africa
harimkb wrote:
after rr 2.97 installation ,

in status-> product information ,

i get the following
What was there before?
harimkb wrote:
1.AP MAC is empty... how to set it manually , can anyone guide me?
Have you enabled the wireless AP?
harimkb wrote:
2. dsl MAC and ethernet mac are same , should it be like that?
It depends on what your router's manufacturer stored in the environment.

_________________
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Mon Feb 13, 2012 7:46 pm 
Newbie
Newbie

Joined: Mon Feb 13, 2012 5:19 pm
Posts: 1
Is the new 2.97 compatible with the Dlink G624T with 32MB of ram? Solved the wifi problem? :?:


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Mon Feb 13, 2012 9:44 pm 
RouterTech Team
RouterTech Team
User avatar

Joined: Wed Feb 01, 2006 10:22 pm
Posts: 12051
Location: England, the Centre of Africa
nVegeth wrote:
Is the new 2.97 compatible with the Dlink G624T with 32MB of ram? Solved the wifi problem? :?:
Unfortunately not. With no sample router to test, there is no hope of sorting that one out.

_________________
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Tue Feb 14, 2012 5:18 am 
Experienced
Experienced
User avatar

Joined: Sun Feb 25, 2007 11:46 pm
Posts: 237
Location: Georgia, USA
Quote:
7. Some other enhancements


Something i'd stick in a release note or a commit ;) "It fixed some stuff, hell if i remember what anymore"


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Tue Feb 14, 2012 7:36 am 
RouterTech Team
RouterTech Team
User avatar

Joined: Wed Feb 01, 2006 10:22 pm
Posts: 12051
Location: England, the Centre of Africa
mysticalos wrote:
Quote:
7. Some other enhancements


Something i'd stick in a release note or a commit ;) "It fixed some stuff, hell if i remember what anymore"
Indeed - and I don't think anyone is interested in the details of scores of tiny little optimizations and fixes in shell scripts and the like. :)

_________________
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.


Top
 Profile  
 
 Post subject: Re: RouterTech Firmware 2.97 Discussion
PostPosted: Tue Feb 14, 2012 3:22 pm 
Newbie
Newbie

Joined: Fri Jul 29, 2011 3:40 pm
Posts: 8
chief , i have enabled "Enable AP" and wifi works correctly ,
but the "AP MAC" value seems to be missing , can u guide me , how to add it manually ,
i am posting the "diagnostics.sh" script output for your reference.

Quote:
ROUTERTECH SYSTEM DIAGNOSTICS

Client browser information
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:10.0) Gecko/20100101 Firefox/10.0

Router operating system version
Linux version 2.4.17_mvl21-malta-mips_fp_le (developers at RouterTech dot Org) #1 Mon Jan 30 22:52:08 GMT 2012

Firmware version information
BUILD=RouterTech_3.6.0D_20120130_2.97
VERSION=3.6.0D-RouterTech-Adam2
BOARD=AR7WRD
TARGET=Adam2_1-Port
FSSTAMP=20120130225550
ROHS=0

Wireless version information
5.7.0.6, 1/4/2005

Wireless chip information
-------- ConfigOptionsFixed ----------
NVSVersion = 02 41 01 00 ffffffcd 01 00 00
ProductId =
ManufactureId =
dot11MacAddress = 01:04:00:11:00:00
ProbeDelay = 257
EndofMemory = 0x6010500
dot11CCAModeSupported = 0
dot11DiversitySupport = 2
dot11ShortPreambleOptionImplemented = 1
dot11PBCCOptionImplemented = 2
dot11ChanneAgilityPresent = 1
dot11PHYType = 2
dot11TempType = 30
-------- ACX100 elements ----------
AntennaList (0) =
SupportedPowerLevels (0) =
SupportedDataRates (0) =
SupportedRegDomains (0) =


PSP version information

Linux OS DSL-PSPOhioL version 4.5.0.5 Best and Final on BasePSP Version 5.7.6.12 Jan 30 2012 22:53:09
Avalanche SOC Version: 0x20005 operating in cached, write back, write allocate mode
Cpu Frequency:150 MHZ
System Bus frequency: 125 MHZ


Driver version information
Core Logic version: 3.6.0D
Texas Instruments CPMAC driver version: 1.5
Texas Instruments CPMAC HAL version: CPMAC 01.07.08 Jan 30 2012 22:52:19
ATM Driver version:[7.05.01.00]
DSL HAL version: [7.05.01.00]
DSP Datapump version: [7.05.01.00] Annex A
SAR HAL version: [01.07.2c]
PDSP Firmware version:[0.54]
Chipset ID: [7300/7300A]

Modem Modulation Information
NO_MODE 0x0
ADSL_G.dmt 0x3
ADSL_G.lite 0x4
ADSL_G.dmt.bis 0x8
ADSL_G.dmt.bis_DELT 0x9
ADSL_2plus 0x10
ADSL_2plus_DELT 0x11
ADSL_re-adsl 0x20
ADSL_re-adsl_DELT 0x21
ADSL_ANSI_T1.413 0x2
MULTI_MODE 0x1
ADSL_G.dmt.bis_AnxI 0x0
ADSL_G.dmt.bis_AnxJ 0x0
ADSL_G.dmt.bis_AnxM 0x400
ADSL_2plus_AnxI 0x0
ADSL_2plus_AnxJ 0x0
ADSL_2plus_AnxM 0x2000
G.shdsl 0x0
IDSL 0x0
HDSL 0x0
SDSL 0x0
VDSL 0x0

System environment (/proc/sys/dev/adam2/environment)
cpmac_phy 0
memsize 0x01000000
flashsize 0x00400000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
bootserport tty0
cpufrequency 150000000
sysfrequency 125000000
bootloaderVersion 0.22.02
ProductID AR7DB
HWRevision none
SerialNumber none
my_ipaddress 192.168.1.1
maca 00:e0:fc:32:98:c4
prompt Adam2_AR7DB
firstfreeaddress 0x9401d888
req_fullrate_freq 125000000
mtd0 0x9008f000,0x903f0000
mtd1 0x90010090,0x9008f000
mtd2 0x90000000,0x90010000
mtd3 0x903F0000,0x90400000
autoload 1
autoload_timeout 7
StaticBuffer 384
usb_prod Quidway WA1003A Series DSL Modem
usb_vid 0x1110
usb_pid 0x9022
usb_serial 00:e0:fc:32:98:c5
mtd4 0x90010000,0x903f0000
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0
usb_board_mac 00:e0:fc:32:98:c5
usb_man HUAWEI
Adam2_Release 0.22.02_b03_Mar 10 2005
sbusfrequency 125000000
usb_rndis_mac 00:e0:fc:32:98:c6
modulation 0x1
HWA_RNDIS 00:E0:A6:66:41:EB
HWA_HRNDIS 00:E0:A6:66:41:E1
connection1 0
connection2 0x8e0b

HWA_3 00:E0:FC:32:98:C4
PPPOE_DSL_MAC 00:E0:FC:32:98:C4
led_conf led.wa1003a.conf
modetty0 38400 n,8,1,hw
modetty1 38400 n,8,1,hw
connection0 0xde06


CPU information
processor : 0
cpu model : MIPS 4KEc V4.8
BogoMIPS : 149.91
wait instruction : no
microsecond timers : yes
extra interrupt vector : yes
hardware watchpoint : yes
VCED exceptions : not available
VCEI exceptions : not available

Memory (RAM) information
total: used: free: shared: buffers: cached:
Mem: 14520320 13897728 622592 0 1069056 4751360
Swap: 0 0 0
MemTotal: 14180 kB
MemFree: 608 kB
MemShared: 0 kB
Buffers: 1044 kB
Cached: 4640 kB
SwapCached: 0 kB
Active: 1884 kB
Inactive: 5424 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 14180 kB
LowFree: 608 kB
SwapTotal: 0 kB
SwapFree: 0 kB

Flash memory (chip) information
Flash_type=AMD; Manufacturer=AMD.
Manufacturer_ID=0x0001; Chip_ID=0x00F9; Chip_Size=0x400000; Erase_Regions=0x0002

Mount points
/dev/mtdblock/0 / squashfs ro 0 0
none /dev devfs rw 0 0
proc /proc proc rw 0 0
ramfs /var ramfs rw 0 0

Filesystems
nodev rootfs
nodev bdev
nodev proc
nodev sockfs
nodev tmpfs
nodev shm
nodev pipefs
nodev ramfs
minix
nodev devfs
squashfs

MTD
dev: size erasesize name
mtd0: 00361000 00010000 "mtd0"
mtd1: 0007ef70 00010000 "mtd1"
mtd2: 00010000 00002000 "mtd2"
mtd3: 00010000 00010000 "mtd3"
mtd4: 003e0000 00010000 "mtd4"

Kernel modules
tiap 708536 1
tiatm 138672 1

Interrupts
7: 715038 R4000 timer/counter [MIPS interrupt]
8: 0 unified secondary [hw0 (Avalanche Primary)]
15: 375 serial [hw0 (Avalanche Primary)]
23: 8402 + SAR [hw0 (Avalanche Primary)]
27: 0 + Cpmac Driver [hw0 (Avalanche Primary)]
29: 50085 vlynq0 [hw0 (Avalanche Primary)]
47: 74 + DSL [hw0 (Avalanche Primary)]
80: 50083 TNETW1130 [hw0 (Low Vlynq)]

Devices
Character devices:
1 mem
2 pty/m%d
3 pty/s%d
4 tts/%d
5 cua/%d
10 misc
108 ppp
128 ptm
136 pts/%d
162 raw

Block devices:
7 loop
31 mtdblock

Serial port information
serinfo:1.0 driver:5.05c revision:2001-07-08
0: uart:16550A port:A8610E00 irq:15 baud:2258 tx:5655 rx:0 RTS|DTR
1: uart:16550A port:A8610F00 irq:16 tx:0 rx:0 RTS|DTR

Processes
PID USER VSZ STAT COMMAND
1 root 1056 S init
2 root 0 SW [keventd]
3 root 0 SWN [ksoftirqd_CPU0]
4 root 0 SW [kswapd]
5 root 0 SW [bdflush]
6 root 0 SW [kupdated]
7 root 0 SW [mtdblockd]
477 root 2300 S /usr/sbin/mini_httpd -d /usr/www -u root -p 80 -c /c
478 root 2140 S /usr/bin/cm_pc
480 root 3660 S /usr/bin/cm_logic -m /dev/ticfg -c /etc/config.xml
523 root 996 S /usr/sbin/wlan/wpa_authenticator
579 root 1056 S init
853 root 2396 S /usr/sbin/pppd plugin pppoe nas0 user bh4426628482 p
896 root 920 S /sbin/msntp -r 2 -t 5 -p 30 -s wwv.nist.gov ntp2b.mc
897 root 684 S /usr/sbin/udhcpd /var/tmp/udhcpd.conf
1144 root 1068 S N {usercmd.cgi} /bin/sh usercmd.cgi
1145 root 2344 S /usr/sbin/mini_httpd -d /usr/www -u root -p 80 -c /c
1150 root 1188 S N /usr/local/bin/routertech_usercmd_prog
1151 root 1060 S N sh -c diagnostics.sh
1152 root 1124 S N {diagnostics.sh} /bin/sh /usr/local/bin/diagnostics.
1192 root 1056 R N /bin/ps

ADSL Modem information

AR7 DSL Modem Statistics:
--------------------------------
[DSL Modem Stats]
US Connection Rate: 480 DS Connection Rate: 1984
DS Line Attenuation: 13 DS Margin: 27
US Line Attenuation: 8 US Margin: 28
US Payload : 808800 DS Payload: 2627424
US Superframe Cnt : 417912 DS Superframe Cnt: 417913
US Transmit Power : 11 DS Transmit Power: 3
LOS errors: 0 SEF errors: 0
Errored Seconds: 0 Severely Err Secs: 0
Frame mode: 3 Max Frame mode: 0
Trained Path: 1 US Peak Cell Rate: 1132
Trained Mode: 3 Selected Mode: 1
ATUC Vendor Code: 4244434D ATUC Revision: 2
Hybrid Selected: 1 Trellis: 1
Showtime Count: 1 DS Max Attainable Bit Rate: 9856 kbps
BitSwap: 1 US Max Attainable Bit Rate: n/a
Annex: AnxA psd_mask_qualifier: 0x0000
ATUC ghsVid: b5 00 42 44 43 4d a1 06
T1413Vid: 00 00 T1413Rev: 00 VendorRev: 00
ATUR ghsVid: b5 00 54 53 54 43 00 00
T1413Vid: 00 00 T1413Rev: 00 VendorRev: 00

[Upstream (TX) Interleave path]
CRC: 1 FEC: 0 NCD: 0
LCD: 0 HEC: 0

[Downstream (RX) Interleave path]
CRC: 0 FEC: 0 NCD: 0
LCD: 0 HEC: 0

[Upstream (TX) Fast path]
CRC: 0 FEC: 0 NCD: 1
LCD: 0 HEC: 0

[Downstream (RX) Fast path]
CRC: 0 FEC: 0 NCD: 0
LCD: 0 HEC: 0

[ATM Stats]
[Upstream/TX]
Good Cell Cnt: 16850
Idle Cell Cnt: 8025984


[Downstream/RX)]
Good Cell Cnt: 54738
Idle Cell Cnt: 33189048
Bad Hec Cell Cnt: 0
Overflow Dropped Cell Cnt: 0

[SAR AAL5 Stats]
Tx PDU's: 3918
Rx PDU's: 4481
Tx Total Bytes: 707234
Rx Total Bytes: 2520797
Tx Total Error Counts: 0
Rx Total Error Counts: 0


[OAM Stats]
Near End F5 Loop Back Count: 0
Near End F4 Loop Back Count: 0
Far End F5 Loop Back Count: 0
Far End F4 Loop Back Count: 0
SAR OAM Ping Response Drop Count=15

Modem DSL link information
SHOWTIME
1
failTrains=1

Trained modulation:
ADSL_G.dmt

Path mode:
Interleaved

Network statistics
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:2048 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:www 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:ftp 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:telnet 0.0.0.0:* LISTEN
tcp 0 0 mygateway1.AR7WRD:www 192.168.1.2:6473 TIME_WAIT
tcp 0 0 mygateway1.AR7WRD:www 192.168.1.2:6479 TIME_WAIT
tcp 0 0 mygateway1.AR7WRD:www 192.168.1.2:6477 TIME_WAIT
tcp 0 0 mygateway1.AR7WRD:www 192.168.1.2:6481 ESTABLISHED
tcp 0 0 mygateway1.AR7WRD:www 192.168.1.2:6474 TIME_WAIT
tcp 0 0 mygateway1.AR7WRD:www 192.168.1.2:6472 TIME_WAIT
tcp 0 0 mygateway1.AR7WRD:www 192.168.1.2:6478 TIME_WAIT
tcp 0 0 mygateway1.AR7WRD:www 192.168.1.2:6476 TIME_WAIT
udp 0 0 0.0.0.0:1812 0.0.0.0:*
udp 0 0 0.0.0.0:bootps 0.0.0.0:*
udp 0 0 0.0.0.0:tftp 0.0.0.0:*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ] DGRAM 562 /var/tmp/cm_miniHttpd.ctl
unix 2 [ ] DGRAM 572 /var/tmp/cm_pc.ctl
unix 2 [ ] DGRAM 586 /var/tmp/cm_logic.ctl
unix 3 [ ] DGRAM 599 /dev/log
unix 2 [ ] DGRAM 601 /dev/klog
unix 2 [ ] DGRAM 1205
unix 2 [ ] STREAM 558
unix 2 [ ] DGRAM 557
unix 2 [ ] DGRAM 25

Iptables chains
Chain PREROUTING (policy ACCEPT 2843 packets, 466K bytes)
pkts bytes target prot opt in out source destination

Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
1493 170K MASQUERADE all -- * ppp0 0.0.0.0/0 0.0.0.0/0

Chain OUTPUT (policy ACCEPT 15 packets, 1012 bytes)
pkts bytes target prot opt in out source destination

Chain INPUT (policy ACCEPT 529 packets, 48676 bytes)
pkts bytes target prot opt in out source destination
241 17392 CFG tcp -- any any 192.168.1.2 anywhere tcp dpt:www Records Packet's Source Interface

115 13790 ACCEPT all -- ppp0 any anywhere anywhere state RELATED,ESTABLISHED
0 0 ACCEPT icmp -- any any anywhere anywhere icmp fragmentation-needed
0 0 DROP icmp -f any any anywhere anywhere
829 108K DROP all -- ppp0 any anywhere anywhere

Chain FORWARD (policy ACCEPT 3683 packets, 584K bytes)
pkts bytes target prot opt in out source destination
3414 2269K ACCEPT all -- ppp0 any anywhere anywhere state RELATED,ESTABLISHED
191 9932 TCPMSS tcp -- any ppp0 anywhere anywhere tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU
0 0 ACCEPT icmp -- any any anywhere anywhere icmp fragmentation-needed
0 0 DROP all -- ppp0 any anywhere anywhere

Chain OUTPUT (policy ACCEPT 518 packets, 312K bytes)
pkts bytes target prot opt in out source destination
9 5184 ACCEPT icmp -- any any anywhere anywhere icmp fragmentation-needed
1 68 DROP icmp -- any ppp0 anywhere anywhere icmp destination-unreachable
0 0 DROP icmp -- any ppp0 anywhere anywhere state INVALID

Network interface details
br0 Link encap:Ethernet HWaddr 00:E0:FC:32:98:C4
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5685 errors:0 dropped:0 overruns:0 frame:0
TX packets:3910 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1184502 (1.1 MiB) TX bytes:2641679 (2.5 MiB)

br1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

br2 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

eth0 Link encap:Ethernet HWaddr 00:E0:FC:32:98:C4
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:1715 dropped:1715 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

nas0 Link encap:Ethernet HWaddr 00:00:02:03:04:05
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4614 errors:0 dropped:0 overruns:0 frame:0
TX packets:4052 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2437001 (2.3 MiB) TX bytes:723729 (706.7 KiB)

ppp0 Link encap:Point-to-Point Protocol
inet addr:117.193.125.248 P-t-P:117.193.112.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1
RX packets:4364 errors:0 dropped:0 overruns:0 frame:0
TX packets:3806 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2391057 (2.2 MiB) TX bytes:591991 (578.1 KiB)

wlan0 Link encap:Ethernet HWaddr 00:50:F1:12:12:10
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5685 errors:0 dropped:0 overruns:0 frame:0
TX packets:3910 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1128880 (1.0 MiB) TX bytes:2641679 (2.5 MiB)


System Log
Jan 30 22:55:15 | Error getting mac from BootLoader enviroment for wlan0
Jan 30 22:55:15 | Using default mac address: 00.50.F1.12.12.10
Jan 30 22:55:15 | Use BootLoader command:
Jan 30 22:55:15 | setenv mac_ap xx.xx.xx.xx.xx.xx
Jan 30 22:55:15 | to set mac address
Jan 30 22:55:15 | Valid Configuration Tree
Jan 30 22:55:15 | NTP Polling Timer for DHCP Started succesfully.
Jan 30 22:55:15 | DSL Polling Timer Started succesfully.
Jan 30 22:55:15 | PSP Boot environment Modem Modulation Change: 0x1
Jan 30 22:55:15 | Firewall NAT service started
Jan 30 22:55:16 | Bridge Created: br0
Jan 30 22:55:18 | Bridge VLAN0 add eth0
Jan 30 22:55:18 | Bridge VLAN AUTO OFF.
Jan 30 22:55:18 | Bridge VLAN0 add eth1
Jan 30 22:55:18 | Bridge VLAN AUTO OFF.
Jan 30 22:55:18 | Bridge VLAN0 add eth2
Jan 30 22:55:18 | Bridge VLAN AUTO OFF.
Jan 30 22:55:18 | Bridge VLAN0 add eth3
Jan 30 22:55:18 | Bridge VLAN AUTO OFF.
Jan 30 22:55:18 | Bridge Created: br1
Jan 30 22:55:18 | Bridge Created: br2
Jan 30 22:55:21 | WPA Authenticator Started
Jan 30 22:55:23 | Bridge Interface Added: eth0
Jan 30 22:55:25 | Add Bridge Iface Error: 1
Jan 30 22:55:25 | Add Bridge Iface Error: 1
Jan 30 22:55:25 | USB is disabled
Jan 30 22:55:25 | DSL Carrier is down
Jan 30 22:55:27 | Add Bridge Iface Error: 1
Jan 30 22:55:29 | AP Driver configuration successful
Jan 30 22:55:33 | AP IS UP
Jan 30 22:55:33 | Bridge Interface Added: wlan0
Jan 30 22:55:35 | DSL Carrier is up
Jan 30 22:55:35 | sar read trained mode (1)(ADSL_G.dmt)
Jan 30 22:55:36 | ---}}} Start of connection delayed for 2 sec
Jan 30 22:55:38 | PPPoE Launch after conn delay timeout ...
Jan 30 22:55:39 | pppd 2.4.4 started by root, uid 0
Jan 30 22:55:54 | Got connection: de06
Jan 30 22:55:54 | New PPP_ID: 0xde06
Jan 30 22:55:54 | Saved Session ID: 0
Jan 30 22:55:54 | AC MAC address: 00-30-88-23-07-db
Jan 30 22:55:54 | Connect: ppp0 {--} nas0
Jan 30 22:55:54 | CHAP authentication succeeded
Jan 30 22:55:54 | local IP address 117.193.125.248
Jan 30 22:55:54 | remote IP address 117.193.112.1
Jan 30 22:55:54 | PPPoE Connect with IP Address 117.193.125.248
Jan 30 22:55:54 | PPPoE Connection Successfully Established
Jan 30 22:55:54 | Renew PPPoE Session ID: 0xde06
Jan 30 22:55:54 | PPPoE Connect with Gateway IP Address: 117.193.112.1
Jan 30 22:56:16 | onconnectWAN: cron has been disabled in the bootloader environment.

Miscellaneous information
RouterTech firmware release: 2.97
Connecting from: 192.168.1.1 [192.168.1.2]
Router's internal name: mygateway1.AR7WRD
Linux version 2.4.17_mvl21-malta-mips_fp_le (developers at RouterTech dot Org) #1 Mon Jan 30 22:52:08 GMT 2012
BUILD=RouterTech_3.6.0D_20120130_2.97
VERSION=3.6.0D-RouterTech-Adam2
BOARD=AR7WRD
TARGET=Adam2_1-Port
FSSTAMP=20120130225550
ROHS=0
Core logic version: 3.6.0D
Boot Loader: Adam2 v0.22.02
ATM Driver version:[7.05.01.00]
DSL HAL version: [7.05.01.00]
DSP Datapump version: [7.05.01.00] Annex A
SAR HAL version: [01.07.2c]
PDSP Firmware version:[0.54]
Chipset ID: [7300/7300A]
Wireless: Yes
Ethernet ports: 1
Upstream rate (kbps): 480
Downstream rate (kbps): 1984
Trained Modulation: ADSL_G.dmt
Path Mode: Interleaved
System uptime: 1hr 59min - 0 day(s), 1 hour(s), 59 minute(s), and 53 second(s) (system 99% idle)
DSL bandwidth stats (approximate):
Downloads : 2.4316 MB
Uploads : 0.6923 MB
Ethernet bandwidth stats:
Transmit: 0.0000 MB; Receive: 0.0000 MB
Line attenuation:
DS Line Attenuation: 13 DS Margin: 27
US Line Attenuation: 8 US Margin: 28
Memory usage:
In active use : 74% of 14180 kb
Available : 26% (3804 kb) of 14180 kb (of which 2748 kb is marked as "Inactive" and 1056 kb is free)
Environment fragmentation:
Fragmentation level is "16" (out of 69 records). The threshold is "30".
Connection information:
WAN Uptime: 1hr 58min 56sec
WAN IP Address: 117.193.125.248
Connection Check #1 : 1 connection(s)
Connection Check #2 : 1 connection(s)
connection0
User command: diagnostics.sh
Command Shell v1.7 (c)2006-2011, RouterTech.Org
Command:



Thanks , for ur time


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 10   [ 144 posts ]
Go to page 1, 2, 3, 4, 5 ... 10  Next


Who is online

Users browsing this forum: Google [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB & WordPress     Hosted by Kieran O'Shea     Site Code © 2005-2011 Kieran O'Shea     All site contents © 2005-2011 RouterTech - All rights reserved     Valid HTML     Valid CSS     Graphics by Neo