is my wag200g dead?

All about firmwares for routers. Support for RouterTech firmwares is here too.
Post Reply
falconpol
Newbie
Newbie
Posts: 4
Joined: Sat Apr 05, 2014 7:44 pm

is my wag200g dead?

Post by falconpol » Mon Apr 07, 2014 10:00 am

hi, i was upgrading my liknsys wag200g from openwag 1.4 firmware to routertech like instruction says @ viewtopic.php?t=4138&f=3

@11 step i got error Uploading Firmware (...) failed
Log msgs:
(...)
Sending STOR command to the target...
550 Data Socket not ready.

what did i wrong and how could i continue to upgrade my router?
router and pc was connected to switch, now i can only connect with it through pctool 2.4, putty and winscp doesnt work
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12067
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: is my wag200g dead?

Post by thechief » Mon Apr 07, 2014 6:08 pm

If you can connect with the pctool, then it is not dead - bricked, but not dead. Successful connection with the pctool means that the bootloader is intact. First step - look at the contents of the environment, and report it here. You can do that with the pctool.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
falconpol
Newbie
Newbie
Posts: 4
Joined: Sat Apr 05, 2014 7:44 pm

Re: is my wag200g dead?

Post by falconpol » Wed Apr 09, 2014 6:31 pm

thechief wrote:If you can connect with the pctool, then it is not dead - bricked, but not dead. Successful connection with the pctool means that the bootloader is intact. First step - look at the contents of the environment, and report it here. You can do that with the pctool.
i just tried other fw -2.97 with win 7 enviornment and it works now. thx for fast reply
Post Reply