Aztech DSL605EU RT.v2.5 led.conf
Aztech DSL605EU RT.v2.5 led.conf
Installed Routertech firmware ( ar7rd-pspboot-1port) to an Aztech DSL605EU DSL Modem.
Tried different RT versions, and v2.5 produced the best upload rates due to its older, but more compatible ATM tiatm.o driver.
Firmware has about 10 different led.conf in /etc, but not for the DSL605EU
Before RT flash, I have saved my original led.conf with correct settings.
Is it possible to MODIFY the included /etc/led.conf to put correct settings?
I have these folders, any of them is writable ?
bin etc proc sbin usr var.tar
dev lib root_cron tmp var
How can I get my saved led.conf into the "writable" folder ?
PS: got no /nvram partition, no "Led" command, have "ledcfg" command
Thanks!
Tried different RT versions, and v2.5 produced the best upload rates due to its older, but more compatible ATM tiatm.o driver.
Firmware has about 10 different led.conf in /etc, but not for the DSL605EU
Before RT flash, I have saved my original led.conf with correct settings.
Is it possible to MODIFY the included /etc/led.conf to put correct settings?
I have these folders, any of them is writable ?
bin etc proc sbin usr var.tar
dev lib root_cron tmp var
How can I get my saved led.conf into the "writable" folder ?
PS: got no /nvram partition, no "Led" command, have "ledcfg" command
Thanks!
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Aztech DSL605EU RT.v2.5 led.conf
The filesystem is readonly.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: Aztech DSL605EU RT.v2.5 led.conf
In a putty terminal I was able to copy & paste original saved led.conf and with CTRL-D created a new_led.conf file in /var/tmp (it is writable)
then "ledcfg -f new_led.conf " and LEDs are working as they supposed to.
however, this gets lost after reboot/power down....so it needs to be repeated.
Verified that v2.2-v2.3-v2.5 has ATM driver v6.01.03.00, and it gives better upstream speed than any newer ATM versions.(download speed same on all)
then "ledcfg -f new_led.conf " and LEDs are working as they supposed to.
however, this gets lost after reboot/power down....so it needs to be repeated.
Verified that v2.2-v2.3-v2.5 has ATM driver v6.01.03.00, and it gives better upstream speed than any newer ATM versions.(download speed same on all)
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Aztech DSL605EU RT.v2.5 led.conf
Yes, /var/tmp/ is writeable - but it is only a ramdisk, as you have discovered.
If you want to automate what you have just done (ie, to run after each reboot), have a look at this:
firmware-faq/#autoexec
If you want to automate what you have just done (ie, to run after each reboot), have a look at this:
firmware-faq/#autoexec
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: Aztech DSL605EU RT.v2.5 led.conf
I think my flash size is 2 MB , am I correct ?
Si I will not be able to have /nvram minix ?
# cat env
BUILD_OPS 0x301
bootloaderVersion 1.4.0.4
ProductID AR7RD
HWRevision Unknown
SerialNumber none
MAC_PORT 0
MEMSZ 0x00800000
FLASHSZ 0x00200000
MODETTY0 9600,n,8,1,hw
MODETTY1 9600,n,8,1,hw
CPUFREQ 211968000
MIPSFREQ 211968000
SYSFREQ 105984000
BOOTCFG m:f:"mtd1"
PROMPT (psbl)
mtd2 0x90000000,0x90010000
mtd3 0x90010000,0x90020000
StaticBuffer 120
Si I will not be able to have /nvram minix ?
# cat env
BUILD_OPS 0x301
bootloaderVersion 1.4.0.4
ProductID AR7RD
HWRevision Unknown
SerialNumber none
MAC_PORT 0
MEMSZ 0x00800000
FLASHSZ 0x00200000
MODETTY0 9600,n,8,1,hw
MODETTY1 9600,n,8,1,hw
CPUFREQ 211968000
MIPSFREQ 211968000
SYSFREQ 105984000
BOOTCFG m:f:"mtd1"
PROMPT (psbl)
mtd2 0x90000000,0x90010000
mtd3 0x90010000,0x90020000
StaticBuffer 120
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Aztech DSL605EU RT.v2.5 led.conf
Correct.jenom wrote:I think my flash size is 2 MB , am I correct ?
Si I will not be able to have /nvram minix ?
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: Aztech DSL605EU RT.v2.5 led.conf
Found an interesting info page on OpenWrt Wiki
it showed a very similar ACORP LAN120 (AR7RD, 2 Mb Flash) with 6 MTDs (mtd0-mtd5)
and if I understand it correctly, the led.cfg was uploaded directly into mtd5
just wondering, that something like this can be implemented in Routertech for the 2 mb modems ?
https://wiki.openwrt.org/doku.php?id=ol ... adls2110hr
ACORP LAN120M firmware
http://mcmcc.bat.ru/acorp/LAN120M/Acorp ... _DSP74.zip
Web login/password: Admin Admin Telnet login/password: root Admin
mtd0 0x90094000,0x901F0000
mtd1 0x90020090,0x90094000
mtd2 0x90000000,0x90010000
mtd3 0x90010000,0x90020000
mtd4 0x90020000,0x901F0000
mtd5 0x901F0000,0x90200000
Add mtd5 and change mtd0 & mtd4
# echo "mtd5 0x901F0000,0x90200000" > /proc/ticfg/env
# echo "mtd4 0x90020000,0x901F0000" > /proc/ticfg/env
# echo "mtd0 0x90094000,0x901F0000" > /proc/ticfg/env
DATA led fix:
# cd /var/var
# tftp -g -l mycfg.tar.gz_blink_on_lan 192.168.0.90
# cat mycfg.tar.gz_blink_on_lan > /dev/mtdblock/5
attachment:mycfg.tar.gz_blink_on_lan file size 756 bytes
it showed a very similar ACORP LAN120 (AR7RD, 2 Mb Flash) with 6 MTDs (mtd0-mtd5)
and if I understand it correctly, the led.cfg was uploaded directly into mtd5
just wondering, that something like this can be implemented in Routertech for the 2 mb modems ?
https://wiki.openwrt.org/doku.php?id=ol ... adls2110hr
ACORP LAN120M firmware
http://mcmcc.bat.ru/acorp/LAN120M/Acorp ... _DSP74.zip
Web login/password: Admin Admin Telnet login/password: root Admin
mtd0 0x90094000,0x901F0000
mtd1 0x90020090,0x90094000
mtd2 0x90000000,0x90010000
mtd3 0x90010000,0x90020000
mtd4 0x90020000,0x901F0000
mtd5 0x901F0000,0x90200000
Add mtd5 and change mtd0 & mtd4
# echo "mtd5 0x901F0000,0x90200000" > /proc/ticfg/env
# echo "mtd4 0x90020000,0x901F0000" > /proc/ticfg/env
# echo "mtd0 0x90094000,0x901F0000" > /proc/ticfg/env
DATA led fix:
# cd /var/var
# tftp -g -l mycfg.tar.gz_blink_on_lan 192.168.0.90
# cat mycfg.tar.gz_blink_on_lan > /dev/mtdblock/5
attachment:mycfg.tar.gz_blink_on_lan file size 756 bytes
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Aztech DSL605EU RT.v2.5 led.conf
The RT firmware is too big for that to be done.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: Aztech DSL605EU RT.v2.5 led.conf
the included adsl2mue led.conf almost works
power led goes green when system up, LAN green when connected, DSL blinks when connecting, then it goes off when connected
I guess, it is as good as it gets....v.250 best for DSL605EU
Thanks!
power led goes green when system up, LAN green when connected, DSL blinks when connecting, then it goes off when connected
I guess, it is as good as it gets....v.250 best for DSL605EU
Thanks!
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Aztech DSL605EU RT.v2.5 led.conf
You're welcome.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.