2 routers
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland
Oh well - short lived success - the firmware is at 2.6 and it seems to show symptoms of running out of memory although i've disabled everything!! I wonder whether its that the new firmware version takes up more memory or the configuration i have it in is conducive to using more memory? I have set memchk.sh to 1 to hopefully fix that - but i'm not even using p2p i'm only downlloading a speedtest file to check the throughput so i'm not sure whats happening! But it is certainly better now i'm using the correct transformer
FUrhtermore i'm actually plugged directlying in to a lan port on the WIRELESS reouter and its' still fine - so everyhthing is ok when it's going directly through LAN but bring wireless intot the queation and it seems to stall. I wonder maybe if it's actually the netgear's problem and not the PLuscom?
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland
I think it must be to do with the NETGEAR's br0 which is the wireless/eth0 bridge - as i can plug intot the netgears wired port and inet access is normal. Must be something going on between the wireless and lan bridge on the netgear... i'm checking some data using ifconfig and brctl but i'm not sure what to change if anything... all networks are inthe same subnet ie - the wirless net is in 192.168.1.0 as well as wired net.
So i'm on thinkbroadband and it downloads at about 587KB/s for anywhere between 3 secs to 1 minute and then it just drops to 0 - sometimes it recovers a bit then drops again.
So i'm on thinkbroadband and it downloads at about 587KB/s for anywhere between 3 secs to 1 minute and then it just drops to 0 - sometimes it recovers a bit then drops again.