Greetings everyone, sorry for my bad english, i just recently update the firmware from my router and stop working i dont know what to do, my router is
Dlink DSL-2540B i did update from the official site, after this,now ther router no work, i cant enter in 192.168.1.1 etc
help please
Help please router dsl 2540b
Re: Help please router dsl 2540b
Greetings to you too!
Do try a hardware reset button if there is one, some sites recommend a 30-30-30 reset which means press and hold the button, wait 30 second, turn router off wait 30 seconds, turn on wait 30 seconds then release the button
Unfortunately it is possible to 'brick' any device when updating its firmware in flash - common problem is losing power or power cycling during the critical flash-write period. If that happens and the bootloader is intact then there may be recovery tools available. The 'b' in model name suggests its a Broadcom router, so unlikely any of the tools on this site will work, sorry.
Do try a hardware reset button if there is one, some sites recommend a 30-30-30 reset which means press and hold the button, wait 30 second, turn router off wait 30 seconds, turn on wait 30 seconds then release the button
Unfortunately it is possible to 'brick' any device when updating its firmware in flash - common problem is losing power or power cycling during the critical flash-write period. If that happens and the bootloader is intact then there may be recovery tools available. The 'b' in model name suggests its a Broadcom router, so unlikely any of the tools on this site will work, sorry.
Re: Help please router dsl 2540b
ok thanks for you time to reply, the only thing is working is router. but i cant access to internet and 192.168.1.1 setup.
bricked forever?
bricked forever?
Re: Help please router dsl 2540b
It sounds like you're going to have to replace the router