RouterTech Firmware v2.3 released

Post by **Kieran** » Thu Jun 07, 2007 2:32 am

The RouterTech team are proud to announce the release of v2.3 of its firmware.

This new release sports a HUGE range of new and exciting features and we encourage all users to have a glance over the release notes to see if there is anything new you might like. If you experienced a bug or two with the previous firmware version and reported it, it will most likely have been fixed in this version so go ahead and upgrade for maximum benefit.

Read release notes, changelog and download a copy of the firmware

Thanks to the development team and all testers who helped out on this release.

micronanopico · Post by **micronanopico** » Sat Jun 09, 2007 8:28 am

Guys!
This is the bee's knees!
Fixes the problems I used to have with 2.2, especially with DDNS and does a heck lot more!
ether-wake is the icing and rshaper is the cherry on top.
Absolutely brilliant work.
It's the most versatile router firmware I have ever seen, excluding a full blown linux PC.

THANK YOU!

Post by **thechief** » Sat Jun 09, 2007 3:43 pm

Thanks for the kind words

Korrigan · Post by **Korrigan** » Fri Aug 17, 2007 10:40 am

I was desperate to find a DECENT firmware for my D-Link DSL-320T, the two official versions from D-Link are total bad.
I found your site, and after a long and extremely cautious reading I took the "risk" to upload your firmware.

I must say I don't regret it, now that is what I call a firmware, and it's not just decent, it's awesome!

Thanks a LOT for your hard work

Post by **SyBorg** » Fri Aug 17, 2007 11:57 am

Korrigan wrote: Thanks a LOT for your hard work

Welcome to RouterTech and thanks for the praise!

siiix · Post by **siiix** » Fri Aug 17, 2007 8:36 pm

edit: deleted because i posted in wrong tread : )

aceueca · Post by **aceueca** » Wed Aug 22, 2007 10:47 pm

where i can find alternative firmware for my dsl-2640t (wireless) ?
since original firmware not include for port forward to torrent also easy to down adsl signal ....
sadly routertech not support the chip ...

Router Upgrade Check 1.1.4 23/08/2007 03:42:24
Router IP: 192.168.1.1
CLI is needed
Description: dsl-2640t
Board type: AR7VW
Product ID: AR7WRD
Bootloader: (psbl)
RAM 16.0 MB
Flash (ROM) 4.0 MB
ADAM2: No
No default env: No
Linux version: 2.4.17_mvl21-malta-mips_fp_le
Firmware build:
Firmware version: V3.02B01T01.EU-A.20070525
Firmware stamp: 20070525161618
CPU: MIPS 4KEc V4.8
DSP: 6.00.04.00
Annex: A
/proc/wlan: Yes
/usr/sbin/wlan: Yes
TIAP: Yes
TNETW: Yes
Wireless: Yes
TNETW1350A: Yes
TNETW1130 conf: No
Marvell: No
NSP: V3.02B01T01.EU-A.20070525

Post by **Shotokan101** » Wed Aug 22, 2007 10:51 pm

fear not - a beta of RT F/W supporting your wireless chip is in the pipeline and should be available for testing before too much longer

grlazy · Post by **grlazy** » Tue Sep 11, 2007 5:50 pm

Hi.
Just flashed a Ovislink WL-8064arm V2 .
Excelent job mate!!!!!!!!!!!!
Here is the log before....

Code: Select all

Router Upgrade Check 1.1.4 11/09/2007 17:07:49
Router IP: 192.168.2.1
CLI is needed
Description: Ovislink wl-8064arm v2
Board type: AR7WRD
Product ID: Wireless
Bootloader: (psbl)
RAM 16,0 MB
Flash (ROM) 4,0 MB
ADAM2: No
No default env: No
Linux version: 2.4.17_mvl21-malta-mips_fp_le
Firmware build: 
Firmware version: 3.6.0C
Firmware stamp: 20051228152037
CPU: MIPS 4KEc V4.8
DSP: 5.02.02.00
Annex: A
/proc/wlan: Yes
/usr/sbin/wlan: Yes
TIAP: Yes
TNETW: Yes
Wireless: Yes
TNETW1350A: No
TNETW1130 conf: Yes
Marvell: Yes
NSP: 3.6.0C

And here is the check log after....

Code: Select all

Router Upgrade Check 1.1.4 11/09/2007 21:43:14
Router IP: 192.168.2.1
Description: Ovislink wl-8064arm v2
Board type: AR7WRD
Product ID: Wireless
Bootloader: (psbl)
RAM 16,0 MB
Flash (ROM) 4,0 MB
ADAM2: No
No default env: No
Linux version: 2.4.17_mvl21-malta-mips_fp_le
Firmware build: RouterTech_3.6.0D_20070604_2.30
Firmware version: 3.6.0D-RouterTech-PSBL
Firmware stamp: 20070604172601
CPU: MIPS 4KEc V4.8
DSP: 6.02.01.00
Annex: A
/proc/wlan: Yes
/usr/sbin/wlan: Yes
TIAP: Yes
TNETW: Yes
Wireless: Yes
TNETW1350A: No
TNETW1130 conf: Yes
Marvell: Yes
NSP: 3.6.0D /usr/sbin/wlan

Is it OK ?

Post by **thechief** » Tue Sep 11, 2007 9:44 pm

Looks good

ibo3000 · Post by **ibo3000** » Sun Sep 30, 2007 4:19 am

thank u man for that job alot

maxx1977 · Post by **maxx1977** » Thu Oct 11, 2007 9:15 pm

I have this Modem/Router Aztech DSL 305EU

Features: ADSL
Bridge
Flash-ROM
Router
Max Communication Protocol: 802.3 Fast Ethernet MAC
G.992.1 A (G.dmt)
G.992.2 (G.lite)
PPPoA (RFC2364)
PPPoE (RFC2516)
T1.413 Issue 2
Communication Buses: LAN, RJ-45
USB
WAN
OS Platforms:
Chipset: Manufacturer: Conexant Systems, Inc.
Family Type: ADSL CPE Controllers
Family: AccessRunner Hasbani Controller
Name: AccessRunner Single-Chip ADSL USB Router
This Firmware works in this modem?

thxz

Post by **thechief** » Thu Oct 11, 2007 10:40 pm

Follow the instructions here: viewtopic.php?t=961
and post the results here. Then we will be able to answer your question.

Better still, run the Router Upgrade Checker, and post the output.

Post by **biro** » Thu Oct 11, 2007 11:07 pm

maxx1977 wrote:I have this Modem/Router Aztech DSL 305EU

Chipset: Manufacturer: Conexant Systems, Inc.
Family Type: ADSL CPE Controllers
Family: AccessRunner Hasbani Controller
Name: AccessRunner Single-Chip ADSL USB Router
This Firmware works in this modem?

thxz

NO, looks like a class 1 router, do you know the current firmware version.

maxx1977 · Post by **maxx1977** » Fri Oct 12, 2007 3:14 am

thanks, this is my current firmware version: 21.6.3, it works fine i'm just looking for something new.

thanks again.

RouterTech Firmware v2.3 released

RouterTech Firmware v2.3 released

Re: RouterTech Firmware v2.3 released

!!!!!!

Aztech 305

Re: Aztech 305