help me!!please
help me!!please
I have a router HA710i with a TI7300AGDW cpu, TNetw1130+ 4prot switcher,I reflash it with routertech firmware V2.2, is OK
I can login 192.168.1.1 with US:Admin ps:Admin.I create a new connection,but is PPPoA or PPPoE the router is not work.
in the config web page,the "system log"have some message, how can I come back my router
I can login 192.168.1.1 with US:Admin ps:Admin.I create a new connection,but is PPPoA or PPPoE the router is not work.
in the config web page,the "system log"have some message, how can I come back my router
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: help me!!please
Post a screen shot of the setup menu.
PS: why in the world would you want to flash an obsolete firmware (version 2.2)? The latest version is 2.91.1.
PS: why in the world would you want to flash an obsolete firmware (version 2.2)? The latest version is 2.91.1.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: help me!!please
because i don't know my router is or not support by the firmware V2.9,so i used the V2.2
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: help me!!please
Did you run the RUC?
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: help me!!please
this is the config page
[attachments removed by thechief]
just I upgrade the firmware to V2.9,but the router desnot work on.
I didnot use the RUC
[attachments removed by thechief]
just I upgrade the firmware to V2.9,but the router desnot work on.
I didnot use the RUC
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: help me!!please
I have removed the attachments (they contained too much private information).
There is no reason why everything should not work, if your modulation is correct, and your annex is correct, and your login details are correct. Since you didn't run the RUC before upgrading, no-one has any idea of the previous working configuration. Since I have no time for playing guesswork, I am afraid I can't help you.
There is no reason why everything should not work, if your modulation is correct, and your annex is correct, and your login details are correct. Since you didn't run the RUC before upgrading, no-one has any idea of the previous working configuration. Since I have no time for playing guesswork, I am afraid I can't help you.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: help me!!please
Thank you very much!
I have reflash router with ASUS AAM6020VI-TI firmware,then router works OK!
I have reflash router with ASUS AAM6020VI-TI firmware,then router works OK!
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: help me!!please
Excellent!
I would advise you to run the RUC, so that you can have a backup of all your router's crucial files and settings.
I would advise you to run the RUC, so that you can have a backup of all your router's crucial files and settings.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: help me!!please
thanks ,that is ok ,I will try to run the RUC!
I have another question! can you help me?
I will run a WEB server in my home with the ADSL router.but the router configure with a web page used 80 port. the WEB server can not use the 80 port again.the router can not modify the port of configure web page with other ports.
how can i modify the configure web page with another port?
I have another question! can you help me?
I will run a WEB server in my home with the ADSL router.but the router configure with a web page used 80 port. the WEB server can not use the 80 port again.the router can not modify the port of configure web page with other ports.
how can i modify the configure web page with another port?
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: help me!!please
Well, I don't know what features your firmware has - but you should be able to change the port number that the http server runs on, from a telnet session. The command to start the http server is normally in /etc/init.d/rcS. There you will see that it supplies port 80. Replicate that command, but change the port, and then you should be able to connect your browser to that port.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: help me!!please
yes ,I can change the port number in the LINUX system,but I don't like user who open my site with "http://www.xxx.com:8080/".I like simple "http://www.xxx.com/".but if I don't change the port number of the router configure page. the "http://www.xxx.com/" redirect to the router's configure page.
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: help me!!please
Are you testing this from inside your LAN or from outside your LAN?yljack wrote:but if I don't change the port number of the router configure page. the "http://www.xxx.com/" redirect to the router's configure page.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: help me!!please
I test this from outside lan also from inside lan. All redirect to my router's configure web page!
I already run the RUC software.the software report: I can select a based ar7wrd with pspboot and 4 port firmware for my router.
I find the firmware V2.9. I will try again. if can not connect with PPPoE ,I will use the AAM6020VI-T4 again.
I already run the RUC software.the software report: I can select a based ar7wrd with pspboot and 4 port firmware for my router.
I find the firmware V2.9. I will try again. if can not connect with PPPoE ,I will use the AAM6020VI-T4 again.
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: help me!!please
If you test it from inside the LAN, it won't work unless your firmware supports "WAN IP local nat loopback". Search for that string in the forum, and you will see what I'm talking about.
Testing it from outside the LAN should not lead to the web config page unless you have configured something wrongly on the router.
Testing it from outside the LAN should not lead to the web config page unless you have configured something wrongly on the router.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.