Can my router use RouterTech firmware?

Talk about anything you like here: as long as it's technical, doesn't fit into the other categories and is within the rules. Questions and discussions about operating systems, programming, websites, hosting, ADSL etc. are particularly welcome here.
Post Reply
baibye
Newbie
Newbie
Posts: 3
Joined: Sat Feb 06, 2010 4:10 am

Can my router use RouterTech firmware?

Post by baibye » Tue Apr 20, 2010 4:21 am

My router can't use RUC,can't find shttpd.

PSB7200+ADM6996,TNETE 1350A,4 Ports,2 USB,16MB Flash,32MB RAM

already saved led.conf :?:
Top
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12067
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:
Contact thechief

Re: Can my router use RouterTech firmware?

Post by thechief » Tue Apr 20, 2010 1:54 pm

Login to the router via telnet or ssh, and supply the outputs of these commands:

Code: Select all

cat /etc/versions
cat /proc/ticfg/env
cat /proc/modules
cat /proc/interrupts
cat /proc/avalanche/avsar_ver
cat /proc/avalanche/avsar_dsl_modulation_schemes
/sbin/ifconfig
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
Top
baibye
Newbie
Newbie
Posts: 3
Joined: Sat Feb 06, 2010 4:10 am

Re: Can my router use RouterTech firmware?

Post by baibye » Wed Apr 21, 2010 6:01 am

# cat /etc/versions
VERSION=3.7.0
BUILD=080402
BOARD=AR7WRD
FSSTAMP=20080402173712

# cat /proc/ticfg/env
BUILD_OPS 0x601
bootloaderVersion 1.4.4.3
ProductID ZXV10 HGW
eoc_vendor_id 3902
IPA 192.168.1.1
IPA_SVR 192.168.1.245
mtd2 0x90000000,0x90020000
mtd3 0x90020000,0x90060000
mtd5 0x90060000,0x90080000
mtd1 0x90080000,0x90160000
mtd0 0x90160000,0x90560000
mtd4 0x90080000,0x90560000
mtd6 0x90560000,0x90580000
mtd7 0x90b00000,0x91000000
BOOTCFG m:f:"mtd1"
MAC_PORT 0
MODETTY0 115200,n,8,1,hw
MODETTY1 115200,n,8,1,hw
CPUFREQ 211968000
MIPSFREQ 211968000
SYSFREQ 125000000
mtd10 0x90580000,0x905a0000
mtd11 0x905a0000,0x905e0000
mtd13 0x905e0000,0x90600000
mtd9 0x90600000,0x906E0000
mtd8 0x906E0000,0x90aE0000
mtd12 0x90600000,0x90aE0000
mtd14 0x90aE0000,0x90b00000
BOOTCFG_A m:f:"mtd1"
BOOTCFG_B m:f:"mtd9"
HWVersion 2.0.6
MEMSZ 0x02000000
FLASHSZ 0x01000000
PROMPT ZXV10 HGW>
DSL_UPG_DONE 1
PRODUCTTOOL_CLEAN_FLASH 1
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0
modulation 0xff
WLAN_EEPROM0 021156041B06001200000601095612000000010D56A9000000026D54DE120056

WLAN_EEPROM1 04120000013984000100000101854C1068900105850600100001298507000000

WLAN_EEPROM2 01C1850000300001C585000000000111850000FFFF0115850000F0FF01A58500

WLAN_EEPROM3 8000000109850000800201010C03000000012184000000800181851D00030001

WLAN_EEPROM4 55090100000001E5580200000001F1580800000001D5581000000001B1580400

WLAN_EEPROM5 0000000000000000000C00C300FE0008011401260144014D014F0165019F01AF

WLAN_EEPROM6 01B70101390000110004010101000501060002010201021E000A000205020411

WLAN_EEPROM7 2244030610203031324004095449204143583130300507544920546573740108

WLAN_EEPROM8 171B88C7CD5C01E80502000038007000AC00E60004044410290045101D00185A

WLAN_EEPROM9 4000145A3C00020E0801CE000A0172025A00CD019E095000E9000A01E0025A00

WLAN_EEPROM10 BC019E090107100000400000010000050400010100000000FFFFFFFFFDFDFDFD

WLAN_EEPROM11 FBF4F4F4F40E0409090909090909090909090909090909090909090909090909

WLAN_EEPROM12 090909090909090909090909090909090909090909090909090909090909090E

WLAN_EEPROM13 0100000000000000000000000000000302A318A3180700012000000000000000

WLAN_EEPROM14 00000000000000000000000000000000000000000000000000
WLAN_EEPROM_STD0 021156041B06001200000601095612000000010D56A9000000026D54
DE120056
WLAN_EEPROM_STD1 04120000013984000100000101854C10689001058506001000012985
07000000
WLAN_EEPROM_STD2 01C1850000300001C585000000000111850000FFFF0115850000F0FF
01A58500
WLAN_EEPROM_STD3 8000000109850000800201010C03000000012184000000800181851D
00030001
WLAN_EEPROM_STD4 55090100000001E5580200000001F1580800000001D5581000000001
B1580400
WLAN_EEPROM_STD5 0000000000000000000C00C300FE0008011401260144014D014F0165
019F01AF
WLAN_EEPROM_STD6 01B70101390000110004010101000501060002010201021E000A0002
05020411
WLAN_EEPROM_STD7 22440306102030313240040954492041435831303005075449205465
73740108
WLAN_EEPROM_STD8 171B88C7CD5C01E80502000038007000AC00E6000404441029004510
1D00185A
WLAN_EEPROM_STD9 4000145A3C00020E0801CE000A0172025A00CD019E095000E9000A01
E0025A00
WLAN_EEPROM_STD10 BC019E090107100000400000010000050400010100000000FFFFFFFF
FDFDFDFD
WLAN_EEPROM_STD11 FBF4F4F4F40E04090909090909090909090909090909090909090909
09090909
WLAN_EEPROM_STD12 09090909090909090909090909090909090909090909090909090909
0909090E
WLAN_EEPROM_STD13 0100000000000000000000000000000302A318A31807000120000000
00000000
WLAN_EEPROM_STD14 00000000000000000000000000000000000000000000000000
OUI 0019C6
Defaultpass [censored]
SSID0 [censored]
SSID0_PRIVACY_TYPE 1
SSID0_PSKVALUE [censored]
SSID1_KEY_CODE 0
SSID2_KEY_CODE 0
SSID3_KEY_CODE 0
SerialNumber1 [censored]
mac_ap 00:19:[censored]
HWA_0 00:19:[censored]
HWA_1 00:19:[censored]
HWA_WAN0 00:19:[censored]
HWA_WAN1 00:19:[censored]
HWA_WAN2 00:19:[censored]
HWA_WAN3 00:19:[censored]
UPMODE adsl

# cat /proc/modules
tiap 819776 1
hcd_1160 28604 0 (unused)
usb-storage 31848 0 (unused)
sd_mod 12556 0 (unused)
scsi_mod 70576 1 [usb-storage sd_mod]
usbcore 69296 1 [hcd_1160 usb-storage]
tiatm 143024 0 (unused)

# cat /proc/avalanche/avsar_ver
ATM Driver version:[7.02.01.00]
DSL HAL version: [7.02.01.00]
DSP Datapump version: [7.02.03.00] Annex A
SAR HAL version: [01.07.2c]
PDSP Firmware version:[0.54]
Chipset ID: [Ohio250(7200/7100A2)]

# cat /proc/avalanche/avsar_dsl_modulation_schemes
NO_MODE 0x0
ADSL_G.dmt 0x2
ADSL_G.lite 0x4
ADSL_G.dmt.bis 0x8
ADSL_G.dmt.bis_DELT 0x9
ADSL_2plus 0x10
ADSL_2plus_DELT 0x11
ADSL_re-adsl 0x20
ADSL_re-adsl_DELT 0x21
ADSL_ANSI_T1.413 0x80
MULTI_MODE 0xff
ADSL_G.dmt.bis_AnxI 0x0
ADSL_G.dmt.bis_AnxJ 0x0
ADSL_G.dmt.bis_AnxM 0x400
ADSL_2plus_AnxI 0x0
ADSL_2plus_AnxJ 0x0
ADSL_2plus_AnxM 0x2000
G.shdsl 0x0
IDSL 0x0
HDSL 0x0
SDSL 0x0
VDSL 0x0

# /sbin/ifconfig
br0 Link encap:Ethernet HWaddr 00:19:[censored]
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ASYMMTU:1500
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:5180 (5.0 kb)

br1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ASYMMTU:1500
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

br2 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ASYMMTU:1500
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

br3 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ASYMMTU:1500
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

br4 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ASYMMTU:1500
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

eth0 Link encap:Ethernet HWaddr 00:19:[censored]
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ASYMMTU:1500
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:5312 (5.1 kb)

eth1 Link encap:Ethernet HWaddr 00:19:[censored]
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ASYMMTU:1500
RX packets:0 errors:0 dropped:0 overruns:0 framqueuelen:0
RX bytes:0 (0.0 b) TX bytes:5312 (5.1 kb)

eth2 Link encap:Ethernet HWaddr 00:19:[censored]
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ASYMMTU:1500
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:5312 (5.1 kb)

eth3 Link encap:Ethernet HWaddr 00:19:[censored]
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ASYMMTU:1500
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:5312 (5.1 kb)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1 ASYMMTU:0
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

wlan0 Link encap:Ethernet HWaddr 00:19:[censored]
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ASYMMTU:1500
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Top
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12067
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:
Contact thechief

Re: Can my router use RouterTech firmware?

Post by thechief » Wed Apr 21, 2010 11:01 am

This looks like a most interesting device. It may be possible (with some effort) to install RT firmwares on it, as it looks like it sports at least the lowest common denominators of the AR7WRD platform. However, it is not a step that should be taken lightly. It is clear that your manufacturer's firmware has a lot of features (as shown in "cat /proc/modules") that simply do not exist on RT (or other AR7) firmwares - so you will be losing a fair amount of current functionality. So, the question is - why do you want to install RT on it?

Furthermore, the sheer number of mtd partitions is bewildering - and the sizes of some of the more common ones are most unusual (e,g, the bootloader (mtd2) partition is 128kb instead of 64kb, and the config/environment (mtd3) partition is 256kb instead of 64kb). The mtd1 partition is set up for separate image upgrades too. Who knows what is in the other partitions?

PS: I have removed some sensitive data "[censored]" which you don't really want floating around on a public forum.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
Top
mstombs
RouterTech Team
RouterTech Team
Posts: 3753
Joined: Wed Jan 10, 2007 11:54 pm

Re: Can my router use RouterTech firmware?

Post by mstombs » Wed Apr 21, 2010 11:56 am

There's a bootlog and an attempt to run OpenWRT on a very similar router here:-

http://www.openwrt.com.cn/bbs/viewthrea ... le&tid=228

and an incomplete attempt to install RT firmware on a similar router here

viewtopic.php?p=37761
Top
baibye
Newbie
Newbie
Posts: 3
Joined: Sat Feb 06, 2010 4:10 am

Re: Can my router use RouterTech firmware?

Post by baibye » Fri Apr 23, 2010 4:03 pm

Thanks to all.
I will use this router,until it can use RT or OpenWRT successful.
Top
Post Reply

Return to “Free Chat (Technical)”