Aztech DSL 605EW (Single Antenna)
Aztech DSL 605EW (Single Antenna)
I have an Aztech DSL605EW modem / router which I need to upgrade the firmware to enable the Ethernet connection function. Currently the modem will work only with ADSL connection..
I am trying to flash it by the way mentioned in the below link
http://www.techarp.com/showarticle.aspx?artno=374&pgno=1
The firmware file I am downloading from the below link
http://www.megaupload.com/?d=DYXUTJLU
After uploading this firmware , the modem will stop responding..I think I am wrong in doing the setenv.txt file as mentioned in the techarp.com webpage...Kindly please give me the values I have to mention in the setenv.txt file.
this is what I am setting now in my current file.
setenv mtd0 0x900af000,0x90400000
setenv mtd1 0x90020090,0x900af000
setenv mtd2 0x90000000,0x90010000
setenv mtd3 0x90010000,0x90020000
setenv mtd4 0x90020000,0x90400000
setenv autoload 1
Please give me a help..
Regards,
I am trying to flash it by the way mentioned in the below link
http://www.techarp.com/showarticle.aspx?artno=374&pgno=1
The firmware file I am downloading from the below link
http://www.megaupload.com/?d=DYXUTJLU
After uploading this firmware , the modem will stop responding..I think I am wrong in doing the setenv.txt file as mentioned in the techarp.com webpage...Kindly please give me the values I have to mention in the setenv.txt file.
this is what I am setting now in my current file.
setenv mtd0 0x900af000,0x90400000
setenv mtd1 0x90020090,0x900af000
setenv mtd2 0x90000000,0x90010000
setenv mtd3 0x90010000,0x90020000
setenv mtd4 0x90020000,0x90400000
setenv autoload 1
Please give me a help..
Regards,
Re: Aztech DSL 605EW (Single Antenna)
There are tools in the software section that will help you check/calculate the required mtd values for your specific bootloader/flash. Note that original firmwares will not be built with supporting multiple styles of router in mind - they will not have the generic switch/flash drivers etc that are included in RouterTech - so it is possible the firmware will not work on your hardware.
Re: Aztech DSL 605EW (Single Antenna)
Could you please tell the name of the utility which I need to use to get the setenv.txt script
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Aztech DSL 605EW (Single Antenna)
Check the RUC (viewtopic.php?t=1062). And see this also: firmware-faq/#tools
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: Aztech DSL 605EW (Single Antenna)
I run the RUC tool and it adviced me to install routertech-ar7wrd-1350A-pspboot-firmware-20100818.zip
but this also not helped me ...After installing this firmware, the modem was not coming up..Then I reflashed it again with Aztech firmware Firmware DSL605EW 120.83.2-002
but this also not helped me ...After installing this firmware, the modem was not coming up..Then I reflashed it again with Aztech firmware Firmware DSL605EW 120.83.2-002
Re: Aztech DSL 605EW (Single Antenna)
I installed the firmware which I was trying before and modem is up now...but the wireless is not turning on...
Re: Aztech DSL 605EW (Single Antenna)
BUILD_OPS 0x301
bootloaderVersion 1.4.0.4
ProductID AR7WRD
HWRevision Unknown
SerialNumber none
IPA 192.168.1.1
MAC_PORT 0
MEMSZ 0x01000000
FLASHSZ 0x00400000
MODETTY0 9600,n,8,1,hw
MODETTY1 9600,n,8,1,hw
CPUFREQ 211968000
MIPSFREQ 211968000
SYSFREQ 105984000
BOOTCFG m:f:"mtd1"
PROMPT (psbl)
mtd0 0x900af000,0x90400000
mtd1 0x90020090,0x900af000
mtd2 0x90000000,0x90010000
mtd3 0x90010000,0x90020000
mtd4 0x90020000,0x90400000
autopvc_enable 1
vlynq_polarity low
pppoe_relay_enabled 1
StaticBuffer 384
DSL_BIT_TMODE 1
sar_ipacemax 6
DSL_UPG_DONE 1
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0
usb_vid 0x0451
usb_pid 0x6060
HWA_RNDIS 00:E0:A6:66:41:EB
HWA_HRNDIS 00:E0:A6:66:41:E1
connection0-mac 00-90-1a-42-fe-d5
bootloaderVersion 1.4.0.4
ProductID AR7WRD
HWRevision Unknown
SerialNumber none
IPA 192.168.1.1
MAC_PORT 0
MEMSZ 0x01000000
FLASHSZ 0x00400000
MODETTY0 9600,n,8,1,hw
MODETTY1 9600,n,8,1,hw
CPUFREQ 211968000
MIPSFREQ 211968000
SYSFREQ 105984000
BOOTCFG m:f:"mtd1"
PROMPT (psbl)
mtd0 0x900af000,0x90400000
mtd1 0x90020090,0x900af000
mtd2 0x90000000,0x90010000
mtd3 0x90010000,0x90020000
mtd4 0x90020000,0x90400000
autopvc_enable 1
vlynq_polarity low
pppoe_relay_enabled 1
StaticBuffer 384
DSL_BIT_TMODE 1
sar_ipacemax 6
DSL_UPG_DONE 1
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0
usb_vid 0x0451
usb_pid 0x6060
HWA_RNDIS 00:E0:A6:66:41:EB
HWA_HRNDIS 00:E0:A6:66:41:E1
connection0-mac 00-90-1a-42-fe-d5
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Aztech DSL 605EW (Single Antenna)
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: Aztech DSL 605EW (Single Antenna)
I think the wireless env got screwed up.
I opened the modem and got these numbers from the chip
TNET D7300EZDW71AREYW
WCT0371 ETSI
00 12 0E 75 00 7F
I opened the modem and got these numbers from the chip
TNET D7300EZDW71AREYW
WCT0371 ETSI
00 12 0E 75 00 7F
Re: Aztech DSL 605EW (Single Antenna)
Is there any option to rebuild the wireless env with the above data
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Aztech DSL 605EW (Single Antenna)
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: Aztech DSL 605EW (Single Antenna)
Hi Chief,
I already downloaded this software and tried to give the MAC Address and TNET ID as I saw when I opened the box
but it gives me this below error
" TNETW ID incomplete : there should be 16 hex characters in tota l"
What I am giving is this below :
MAC : 00120E75007F
TNETW ID : D7 30 0E ZD W7 1A RE YW
Am I giving the right ID or is there any other value I have to give.
I already downloaded this software and tried to give the MAC Address and TNET ID as I saw when I opened the box
but it gives me this below error
" TNETW ID incomplete : there should be 16 hex characters in tota l"
What I am giving is this below :
MAC : 00120E75007F
TNETW ID : D7 30 0E ZD W7 1A RE YW
Am I giving the right ID or is there any other value I have to give.
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Aztech DSL 605EW (Single Antenna)
That is not a TNETW ID. You should let the program find it for you. Otherwise, you will need to look in the system log.hashir wrote:TNETW ID : D7 30 0E ZD W7 1A RE YW
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
Re: Aztech DSL 605EW (Single Antenna)
The program always stuck at 38% and it never go beyond that.
How do I get the system log..
How do I get the system log..
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Re: Aztech DSL 605EW (Single Antenna)
Don't know about your firmware - but in our firmware it is in the "Status" menu.hashir wrote:How do I get the system log..
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.