D-link DSL-500T
D-link DSL-500T
Hello,
This is my 1st time participating in your forum. Before I forward my question, I'd like to congratulate & thank you for the firmware. I've loaded your ver 2.2 into my Dlink DSL-G604T & it works very well....even much better than the original Dlink firmwares (UK, EU, AU & RU). Your firmware releases the power within the 604.
Now...for my question. I have another Dlink which is a single port router. It's a 500T & is from Malaysia. The original firmware is a V1 that only supports ADSL but I've managed to upgrade to V2 which support ADSL 2/2+. Anyway....just to let you know...we don't have ADSL 2 / 2+ in Malaysia. Max DL is 2m & UL is 512kb....slow huh? Anyway....is it possible for me to update my 500T to the single port ADAM firmware of yours? I tried but it didn't work, so I downgrade back to v2.
Appreciate it if you can tell me.
Thanks & Warmest Regards,
Khoo
This is my 1st time participating in your forum. Before I forward my question, I'd like to congratulate & thank you for the firmware. I've loaded your ver 2.2 into my Dlink DSL-G604T & it works very well....even much better than the original Dlink firmwares (UK, EU, AU & RU). Your firmware releases the power within the 604.
Now...for my question. I have another Dlink which is a single port router. It's a 500T & is from Malaysia. The original firmware is a V1 that only supports ADSL but I've managed to upgrade to V2 which support ADSL 2/2+. Anyway....just to let you know...we don't have ADSL 2 / 2+ in Malaysia. Max DL is 2m & UL is 512kb....slow huh? Anyway....is it possible for me to update my 500T to the single port ADAM firmware of yours? I tried but it didn't work, so I downgrade back to v2.
Appreciate it if you can tell me.
Thanks & Warmest Regards,
Khoo
Hi khooba, welcome to RouterTech and thank you for the nice comments
For your router try the Upgrade Checker -> viewtopic.php?t=1062
If it finds that your router is compatible with an RT firmware it will also suggest which firmware to download and try.
For your router try the Upgrade Checker -> viewtopic.php?t=1062
If it finds that your router is compatible with an RT firmware it will also suggest which firmware to download and try.
We learn something every day, and lots of times it’s that what we learned the day before was wrong.
—Bill Vaughan
—Bill Vaughan
-
- Novice
- Posts: 37
- Joined: Fri Feb 09, 2007 6:39 am
Why do they screw with the model numbers so much?
I have a DSL-504 but so far as I can tell its not even slightly related to the DSL-500, its far FAR older and I couldn't even get it to keep sync at 4Mbit never mind anything better.
Was a good old little router so long as you didn't enable DNS Proxy or have MaxDSL.
It was from back before routers were powerful enough to do stateful packet inspection, had sod-all functionality.
I have a DSL-504 but so far as I can tell its not even slightly related to the DSL-500, its far FAR older and I couldn't even get it to keep sync at 4Mbit never mind anything better.
Was a good old little router so long as you didn't enable DNS Proxy or have MaxDSL.
It was from back before routers were powerful enough to do stateful packet inspection, had sod-all functionality.
Dear All,
Well...I've used the upgrade checker to detect the DSL-500T & it mentioned that my firmware is too old & needs to be upgraded to the latest firmware. The problem is....IT IS the latest firmware. I've already upgraded to v2 & using the Thailand & Russian firmware. And I even tried to flash using the Australian DSL-502T firmware but the upgrade checker seems to conclude the same thing.
Anyway...I've tried to load the routertech 1 port adam2 firmware & it manages to load well....and I even manage to log in & all....but after I reset....I can't get an IP. It only states private IP 69.x.x.x Even tried to force by manual IP but no response. What is wrong? All I know is the routertech firmware did get into the DSL-500T but no response after that...only the power light is on...and nothing else.
So...flash back to my DSL-502T AU firmware. Just for your info, my 1 port router is the same as DSL-302T for some region & it is also compatible with DSL-502T but the latter has an additional USB port.
Any ideas....anyone??
Thanks & Warmest Regards,
Khoo
Well...I've used the upgrade checker to detect the DSL-500T & it mentioned that my firmware is too old & needs to be upgraded to the latest firmware. The problem is....IT IS the latest firmware. I've already upgraded to v2 & using the Thailand & Russian firmware. And I even tried to flash using the Australian DSL-502T firmware but the upgrade checker seems to conclude the same thing.
Anyway...I've tried to load the routertech 1 port adam2 firmware & it manages to load well....and I even manage to log in & all....but after I reset....I can't get an IP. It only states private IP 69.x.x.x Even tried to force by manual IP but no response. What is wrong? All I know is the routertech firmware did get into the DSL-500T but no response after that...only the power light is on...and nothing else.
So...flash back to my DSL-502T AU firmware. Just for your info, my 1 port router is the same as DSL-302T for some region & it is also compatible with DSL-502T but the latter has an additional USB port.
Any ideas....anyone??
Thanks & Warmest Regards,
Khoo
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland
Better than nothing ?khooba wrote:Thanks...mstombs.
Unfortunately I don't understand Italian...so no idea of what was discussed.
Translation....anyone?
Thanks & Warmest Regards,
Khoo
Jim
.....I'm Sorry But I Can't Do That Dave.....
.....I'm Sorry But I Can't Do That Dave.....
@khooba
For DSL-500T the last russian fw is the V.3 that probably use D-Link DSP6. Also you can try the DSP6.2 & DSP7.1 Acorp fw based developed by McMCC for 500T.
To recover your router you can try TiUpgrade (the ufficial D-Link updater) in "corrupted image" mode.
If you need help by D-Link italian owners you can post in the english section of Dlinkpedia forum:
http://forum.noxirc.net/dlinkpedia-project/
For DSL-500T the last russian fw is the V.3 that probably use D-Link DSP6. Also you can try the DSP6.2 & DSP7.1 Acorp fw based developed by McMCC for 500T.
To recover your router you can try TiUpgrade (the ufficial D-Link updater) in "corrupted image" mode.
If you need help by D-Link italian owners you can post in the english section of Dlinkpedia forum:
http://forum.noxirc.net/dlinkpedia-project/
- thechief
- RouterTech Team
- Posts: 12067
- Joined: Wed Feb 01, 2006 10:22 pm
- Location: England, the Centre of Africa
- Contact:
Cool.
The Chief: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
No support via PM. Ask all questions on the open forum.
hello all,
I have DSL-500T with AR7DB processor. but for 2.3 firmware needs AR7(W)RD. this is critically different? or not?
I can flash 2.3 firmware and get working router or I may get brick?
maybe somebody flash 500T on AR7DB processor with 2.3 firmware?
so ... this is my modem data:
PS sorry for my english my native language is russian
I have DSL-500T with AR7DB processor. but for 2.3 firmware needs AR7(W)RD. this is critically different? or not?
I can flash 2.3 firmware and get working router or I may get brick?
maybe somebody flash 500T on AR7DB processor with 2.3 firmware?
so ... this is my modem data:
Code: Select all
# cat /proc/ticfg/env
memsize 0x01000000
flashsize 0x00400000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
bootserport tty0
cpufrequency 150000000
sysfrequency 125000000
bootloaderVersion 0.22.02
ProductID AR7DB
HWRevision Unknown
SerialNumber none
my_ipaddress 192.168.1.199
maca 00:0F:3D:xx:xx:xx
prompt Adam2_AR7DB
firstfreeaddress 0x9401d328
req_fullrate_freq 125000000
mtd0 0x900a1000,0x903f0000
mtd1 0x90010090,0x900a1000
mtd2 0x90000000,0x90010000
mtd3 0x903f0000,0x90400000
autoload 1
usb_vid 0x0
usb_pid 0x0
usb_man N/A
usb_prod N/A
autoload_timeout 5
mtd4 0x90010000,0x903f0000
StaticBuffer 120
vcc_encaps0 0.0
vcc_encaps1 0.0
vcc_encaps2 0.0
vcc_encaps3 0.0
vcc_encaps4 0.0
vcc_encaps5 0.0
vcc_encaps6 0.0
vcc_encaps7 0.0
modulation 0xffff
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland