Wonder if you can help with problem I'm having re RUC partially completing on a DLINK DSL-G604T - have downloaded all three versions of RUC and have installed VB6 runtime files and mswinsck.ocx - tried running all three versions 1.1.6-8 inc, but none complete.
Versions 1.1.7 and 1.1.8 get about 75-6% and wont go any further, producing a log file in the relevant folder (copy attached below). Version 1.1.6 runs only to 30% and doesnt produce the logfile - all systems running on my trusty, rusty old selfbuild Intel lappy with XP.
Any suggestions?
Cannot complete RUC run
Cannot complete RUC run
- Attachments
-
- env-20071112_152358_DLINK DSL-G604T.zip
- (550 Bytes) Downloaded 545 times
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland
- Shotokan101
- RouterTech Team
- Posts: 4779
- Joined: Thu Jan 26, 2006 3:17 pm
- Location: Glasgow, Scotland
Hi - no offence meant - just got to check the obvious first - not everybody follows the insructions or even reads themchrisalis wrote:No Jim - exactly the same - I've read the other threads and there seems to be an unresolved issue here? - which is why I'm posting rather than followings the instructions in the readme...
Jim
.....I'm Sorry But I Can't Do That Dave.....
.....I'm Sorry But I Can't Do That Dave.....
There are some instructions in the readme on how to report problems like this
Although I haven't seen the partial report, I'm guessing this is down to a timing issue. The RUC seems to have this problem with several DLink routers. I have been incorporating some extra debugging features to work around this type of problem - here is a later (beta) version: Download v1.1.9
If you change the login prompt in the INI from from "login" to "ogin", the RUC should complete. If not, please run the RUC in debug mode and PM the results to me
Although I haven't seen the partial report, I'm guessing this is down to a timing issue. The RUC seems to have this problem with several DLink routers. I have been incorporating some extra debugging features to work around this type of problem - here is a later (beta) version: Download v1.1.9
If you change the login prompt in the INI from from "login" to "ogin", the RUC should complete. If not, please run the RUC in debug mode and PM the results to me
RouterTech Team and Founding Member
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
This was a general problem with the dlink official firmware versus the RUC.
There is certain point where the dlink replies "ogin:" instead of "login:". (Or possibly windows or the RUC drop the character. )
For info: I made the 2.3 upgrade on a dsl-g604t V.A1 last week. Its working well. It seems faster and more stable.
I took the precaution of using DarkWolf's variant as its tuned to the dlink a little more and some people said it installed better over dlink's own firmware.
I found the first install attempt bricked the router (ie. lost most of the firmware) so I then reran the install using the "failed upgrade" mode. This worked OK.
Make sure you read the main upgrade threads on here as a precaution. Do all the things they recommend (just incase).
If you need more advise ask here or PM me.
There is certain point where the dlink replies "ogin:" instead of "login:". (Or possibly windows or the RUC drop the character. )
For info: I made the 2.3 upgrade on a dsl-g604t V.A1 last week. Its working well. It seems faster and more stable.
I took the precaution of using DarkWolf's variant as its tuned to the dlink a little more and some people said it installed better over dlink's own firmware.
I found the first install attempt bricked the router (ie. lost most of the firmware) so I then reran the install using the "failed upgrade" mode. This worked OK.
Make sure you read the main upgrade threads on here as a precaution. Do all the things they recommend (just incase).
If you need more advise ask here or PM me.
Thanks for confirming my suspicions...KevinR wrote:This was a general problem with the dlink official firmware versus the RUC.
There is certain point where the dlink replies "ogin:" instead of "login:". (Or possibly windows or the RUC drop the character. )
We generally recommend everyone posts their support/advice etc on the forum so that others may benefit. The RT team will not provide support via PMsKevinR wrote:If you need more advise ask here or PM me.
RouterTech Team and Founding Member
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!
RouterTech Merchandise (UK)
No support via PM, please ask your questions on the forum!