RouterTech Firmware 2.8 Discussion

Post by **thechief** » Thu Mar 19, 2009 5:11 pm

Ok, there is nothing there that looks out of place. If you are accessing the router from inside your LAN, then you shouldn't have that problem. If you access it from the WAN, then you will not be able to use the features that you have reported about. This is a security precaution.

brylok1981 · Post by **brylok1981** » Thu Mar 19, 2009 5:15 pm

i have accessed to my router from my LAN

Post by **thechief** » Thu Mar 19, 2009 5:23 pm

And you still can't run "optimise ram" or "run command" ?

brylok1981 · Post by **brylok1981** » Thu Mar 19, 2009 6:17 pm

after few hours of of router work i can't
in beginning after upload firmware all is ok

i uploaded frimware tree times in three days to check it

Post by **thechief** » Thu Mar 19, 2009 6:42 pm

That is odd. It should not happen. If it happens again, login to the router via telnet/ssh, and run this command

Code: Select all

diagnostics.sh > diag.log

Fetch diag.log from the router's /var/ directory, and post it (in a zip file).

brylok1981 · Post by **brylok1981** » Thu Mar 19, 2009 9:27 pm

ok i will do that if problem repeat again

I have another question

where are separate image files of firmware
routertech_ar7wrd_adam2_firmware_20081123.zip

in this zip are only 2 files

RouterTech_3.6.0D_20081123_2.80_AR7WRD_Adam2_firmware.upgrade.img

RTech_AR7WRD_config.img

Post by **thechief** » Fri Mar 20, 2009 8:25 am

brylok1981 wrote:where are separate image files of firmware
routertech_ar7wrd_adam2_firmware_20081123.zip

They are nowhere. Read history.html in the firmware docs.

tamsin · Post by **tamsin** » Fri Mar 20, 2009 5:18 pm

I'm currently running the RUC - I had to manually insert the company and model names. It's still stuck on 10% for over half an hour - should I abort? Or does it take that long? Thankyou.

Post by **thechief** » Fri Mar 20, 2009 6:46 pm

It shouldn't take more than a minute to run. Abort, and read the docs about trouble shooting.

brylok1981 · Post by **brylok1981** » Fri Mar 20, 2009 8:44 pm

thechief wrote:That is odd. It should not happen. If it happens again, login to the router via telnet/ssh, and run this command
Code: Select all
diagnostics.sh > diag.log
Fetch diag.log from the router's /var/ directory, and post it (in a zip file).

it is happened again

Post by **thechief** » Fri Mar 20, 2009 10:12 pm

There is nothing obvious from the log that shows why there should be a problem. However, you seem to be running a number of things

localnat.sh init

299 root 668 S /usr/sbin/routed -d -g -v 2 -p test
343 root 644 S /usr/sbin/IGMPProxy -n ppp0
344 root 720 S /usr/sbin/upnpd ppp0 br0

Disable all of these, and see if the problem still happens.

brylok1981 · Post by **brylok1981** » Sat Mar 21, 2009 3:24 pm

I have unset upnp rip and igm proxy reboot but it did't help
i will upload firmware again at about few days and we will see

jiangiang · Post by **jiangiang** » Tue Mar 24, 2009 3:03 pm

The routertech firmware can use in this modem--Prolink H9300G or not?

Post by **thechief** » Tue Mar 24, 2009 6:36 pm

Run the Router Upgrade Checker.

kencoes · Post by **kencoes** » Fri Apr 03, 2009 8:28 am

my modem is Aztech DSL600EU firmware 100.2.5
PC OS Windows XP Media Center SP3
Connect on modem via etehrnet cable
I did brick my modem after hard reset, i cant get tat firmware at all.
I just try with other ver firmware with same model (didnt work)

Than i chose to use RouterTech Firmware 2.8 (It work)

But i got some problem, DLS line wont connect

I can login on web config via 192.168.1.1 (tat i cant connect b4 using RouterTech Firmware 2.

Did i use wrong firmware..?

Can anyone tell me step by step to setting it..?

Im newbie on this.... Please help...