Airties RT-205

Support forum for routers of all shapes and sizes. As long as it's router based and doesn't fall into the other categories, this is the place to ask your questions.
Post Reply
Tromick
Newbie
Newbie
Posts: 8
Joined: Mon Aug 14, 2017 8:40 pm

Airties RT-205

Post by Tromick » Mon Aug 14, 2017 9:13 pm

How will i connect this to PC? I can't find any document for this. I don't think it is JTAG. Cuz i can get some unknown characters with TTL. But i can't get the right connection.
Attachments
20170814_224507.jpg
frtfrt
Newbie
Newbie
Posts: 1
Joined: Tue Sep 26, 2017 10:57 am

Re: Airties RT-205

Post by frtfrt » Sat Sep 30, 2017 1:05 am

You can apply it like the photo.
Attachments
IMG_0013.JPG
Airties RT-205
Tromick
Newbie
Newbie
Posts: 8
Joined: Mon Aug 14, 2017 8:40 pm

Re: Airties RT-205

Post by Tromick » Sat Dec 09, 2017 5:34 pm

frtfrt wrote:You can apply it like the photo.
There is a problem... I can't upgrade my firmware...

Code: Select all

Starting pid 75, console /dev/tts/0: '/bin/sh'


BusyBox v0.61.pre (2007.04.30-15:48+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

#
#
#
# help

Built-in commands:
-------------------
        . : bg break builtin cd chdir continue eval exec exit export
        false fc fg hash help jobs kill local pwd read readonly return
        set setvar shift times trap true type ulimit umask unset wait


# fwupgrade 192.168.2.2 C:/AirTies_RT-205TT_FW_3.0.0.5.bin
Starting up a transaction group 987
shuttingdown processes
Finishing up a transaction group 987
tftp: timeout
tftp: timeout
tftp: timeout
tftp: timeout
tftp: timeout
tftp: timeout
tftp: last timeout
fwupgrade : Download complete. Upgrading firmware ......
Terminated
#

****************** NSP Firmware Upgrade ******************
Mounting PROC on /var/proc...OK
Mounting DEV on /var/dev...OK
Pivoting / to /var...OK
Changing work dir to / ...OK
Unmounting /flash/proc...OK
Unmounting /flash/dev...OK
Unmounting /flash...OK
Upgrading flash memory...
FLASH fw.bin...
FLASH fw.bin failed.
*** FATAL ERROR. Use PC App now. ***
mtd0 = 0x900a1000,0x903d0000
mtd1 = 0x90020090,0x900a1000
mtd2 = 0x90000000,0x90010000
mtd3 = 0x90010000,0x90020000
mtd4 = 0x90020000,0x903d0000
Restarting system.

Basic POST completed...     Success.
Last reset cause: Software reset (memory controller also reset)

PSPBoot1.4 rev: 1.4.0.4
(c) Copyright 2002-2005 Texas Instruments, Inc. All Rights Reserved.


Modified by AirTies Wireless Networks (c) 2005
 Press ESC for monitor... 1

AirTies->

Booting...
Launching kernel decompressor.
Starting LZMA Uncompression Algorithm.
Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor Pavlov.
Compressed file is LZMA format.
Kernel decompressor was successful ... launching kernel.

LINUX started...
Config serial console: ttyS0,115200
Auto Detection OHIO chip
This SOC has MDIX cababilities on chip.
WLAN 1350 chip configured.
CONFIG_AVALANCHE_VLYNQ_POLARITY_LOW
Success in setting up the VLYNQ.
CPU revision is: 00018448
Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Primary data cache 8kb, linesize 16 bytes (4 ways)
Number of TLB entries 16.
Linux version 2.4.17_mvl21-malta-mips_fp_le (beri@debian) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Mon Apr 30 18:43:51 EEST 2007
Determined physical RAM map:
 memory: 14000000 @ 00000000 (reserved)
 memory: 00020000 @ 14000000 (ROM data)
 memory: 00fe0000 @ 14020000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
calculating r4koff... 000ac800(706560)
CPU frequency 141.31 MHz
Calibrating delay loop... 140.90 BogoMIPS
Freeing Adam2 reserved memory [0x14001000,0x0001f000]
Memory: 14228k/16384k available (1621k kernel code, 2156k reserved, 103k data, 60k init)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
TI Optimizations: Allocating TI-Cached Memory Pool.
Warning: Number of buffers is not configured.Setting default to 120
Using 120 Buffers for TI-Cached Memory Pool.
DEBUG: Using Hybrid Mode.
NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.
Initializing RT netlink socket
DEBUG: Starting ksoftirqd with ALWAYS_SOFTIRQ:0x3 NON ALWAYS SOFTIRQ:0xfffffffc.
DEBUG: Starting ksoftirqd with priority:0 policy:0 nice:19.
Starting kswapd
Disabling the Out Of Memory Killer
devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.1 (2006/08/19) Phillip Lougher
pty: 32 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
Installed misc driver vlynq0: it handles vlynq bridge0 with 1 hop(s).
block: 64 slots per queue, batch=16
Initializing the TI QoS NSP Framework.
DEBUG: Initializing the Network Queue Manager Algorithms.
DEBUG: Initialization of the Translation Unit.
DEBUG: Initializing the LOCAL High Priority Database Module.
DEBUG: Initialization of the LOCAL High Priority Database Module successful..
Succesfully Initialized the TI QoS NSP Framework.
Error getting CPMAC Configuration params for instance:0
Environment Variable:MACCFG_A not set in bootloader
Setting Default configuration params for CPMAC instance:0

 MAC CFG : Tx Interrupts off , threshold : 20
Default Asymmetric MTU for eth0 1500
TI CPMAC Linux DDA version 1.9 - CPMAC DDC version 0.3
Cpmac: Installed 1 instances.
Cpmac driver is allocating buffer memory at init time.
PPP generic driver version 2.4.1
avalanche flash device: 0x400000 at 0x10000000.
 Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
Avalanche: No single image format found. Using mtd env variables
Looking for mtd device :mtd0:
Avalanche: Adding a mtd0 image (0xa1000), with size (0x32f000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x000a1000-0x003d0000 : "mtd0"
mtd: partition "mtd0" doesn't start on an erase block boundary -- force read-only
Avalanche:      linking partition mtd0: mtd0 -> ../../mtdblock/0
Looking for mtd device :mtd1:
Avalanche: Adding a mtd1 image (0x20090), with size (0x80f70).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00020090-0x000a1000 : "mtd1"
mtd: partition "mtd1" doesn't start on an erase block boundary -- force read-only
Avalanche:      linking partition mtd1: mtd1 -> ../../mtdblock/1
Looking for mtd device :mtd2:
Avalanche: Adding a mtd2 image (0x0), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00000000-0x00010000 : "mtd2"
Avalanche:      linking partition mtd2: mtd2 -> ../../mtdblock/2
Looking for mtd device :mtd3:
Avalanche: Adding a mtd3 image (0x10000), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00010000-0x00020000 : "mtd3"
Avalanche:      linking partition mtd3: mtd3 -> ../../mtdblock/3
Looking for mtd device :mtd4:
Avalanche: Adding a mtd4 image (0x20000), with size (0x3b0000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00020000-0x003d0000 : "mtd4"
Avalanche:      linking partition mtd4: mtd4 -> ../../mtdblock/4
Looking for mtd device :mtd5:
Avalanche: Adding a mtd5 image (0x3d0000), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x003d0000-0x003e0000 : "mtd5"
Avalanche:      linking partition mtd5: mtd5 -> ../../mtdblock/5
Looking for mtd device :mtd6:
Avalanche: Adding a mtd6 image (0x3e0000), with size (0x20000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x003e0000-0x00400000 : "mtd6"
Avalanche:      linking partition mtd6: mtd6 -> ../../mtdblock/6
Looking for mtd device :mtd7:
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.0 (128 buckets, 1024 max) - 372 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
netfilter PSD loaded - (c) astaro AG
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Initializing the WAN Bridge.
Please set the MAC Address for the WAN Bridge.
Set the Environment variable 'wan_br_mac'.
MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k freed
serial console detected.  Disabling virtual terminals.
console=/dev/tts/0
init started:  BusyBox v0.61.pre (2007.04.30-15:48+0000) multi-call binary
Starting pid 9, console /dev/tts/0: '/etc/init.d/rcS'
Algorithmics/MIPS FPU Emulator v1.5
ledcfg: reading Standard Configuration File /etc/led.conf
ledcfg: configured 17 states
insmod: avalanche_usb.o: no module by that name found
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/atm/tiatm.o
registered device TI Avalanche SAR
Ohio250(7200/7100A2) detected
DSP binary filesize = 374774 bytes
tn7dsl_init : env var DSL_BIT_TMODE is set
ERROR DSL: Unable to register with LED module
Texas Instruments ATM driver: version:[7.01.00.10]
MTD5 IS OK.
MOUNTING /dev/mtdblock/5 IS OK
UNMOUNTING /dev/mtdblock/5 IS OK
Waiting for enter to start '/bin/sh' (pid 75, terminal /dev/tts/0)

Please press Enter to activate this console. Started pid:76 application: /usr/bin/cm_logic -m /dev/ticfg -c /etc/config.xml
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
Sep  8 12:00:17 cfgmgr(logic): instantiate_module: no module 'igmpproxy' registered
Sep  8 12:00:17 cfgmgr(logic): endElement: couldn't instantiate the module 'igmpproxy'
Sep  8 12:00:17 cfgmgr(logic): instantiate_module: no module 'pr' registered
Sep  8 12:00:17 cfgmgr(logic): endElement: couldn't instantiate the module 'pr'
ADSLCounter:Loaded Values:
Date=0
1:RX:0  TX:0
2:RX:0  TX:0
3:RX:0  TX:0
4:RX:0  TX:0
5:RX:0  TX:0
6:RX:0  TX:0
7:RX:0  TX:0
8:RX:0  TX:0
9:RX:0  TX:0
10:RX:0 TX:0
11:RX:0 TX:0
12:RX:0 TX:0
ADSLCounters:Initialized
Sep  8 12:00:18 cfgmgr(sar): oamPingInterval(20)(20)
Sep  8 12:00:18 cfgmgr(logic): instantiate_module: no module 'wbridge' registered
Sep  8 12:00:18 cfgmgr(logic): endElement: couldn't instantiate the module 'wbd0'
Sep  8 12:00:18 cfgmgr(logic): instantiate_module: no module 'wbridge' registered
Sep  8 12:00:18 cfgmgr(logic): endElement: couldn't instantiate the module 'wbd1'
Sep  8 12:00:18 cfgmgr(logic): instantiate_module: no module 'wbridge' registered
Sep  8 12:00:18 cfgmgr(logic): endElement: couldn't instantiate the module 'wbd2'
Sep  8 12:00:18 cfgmgr(logic): instantiate_module: no module 'wbridge' registered
Sep  8 12:00:18 cfgmgr(logic): endElement: couldn't instantiate the module 'wbd3'
Sep  8 12:00:19 cfgmgr(ap): AP Acquiring Lock
Sep  8 12:00:19 cfgmgr(pppoe-106): Valid Configuration Tree
Sep  8 12:00:19 cfgmgr(logic): couldn't find dependent module 'wbd0'
Sep  8 12:00:19 cfgmgr(logic): couldn't find module 'igmpproxy'
Sep  8 12:00:19 cfgmgr(logic): couldn't find module 'pr'
Sep  8 12:00:19 cfgmgr(logic): couldn't find module 'wbd0'
Sep  8 12:00:19 cfgmgr(logic): couldn't find module 'wbd1'
Sep  8 12:00:19 cfgmgr(logic): couldn't find module 'wbd2'
Sep  8 12:00:19 cfgmgr(logic): couldn't find module 'wbd3'
Doing BRCTL ...
addbr br0
Sep  8 12:00:19 cfgmgr(resolver): stat successfull for /etc/resolv.conf.
Sep  8 12:00:19 cfgmgr(resolver): Resolver Polling Timer Started succesfully.
ADSLCounter Polling Timer Started succesfully.
Sep  8 12:00:19 cfgmgr(snmpcm): snmpd starts (1)
Sep  8 12:00:19 cfgmgr(sntp): NTP Polling Timer for DHCP Started succesfully.
Sep  8 12:00:19 cfgmgr(sar): DSL Polling Timer Started succesfully.
Sep  8 12:00:19 cfgmgr(fdb): Firewall NAT service started
Sep  8 12:00:19 cfgmgr(ap): AP REPORT LOCK ACQUIRED
Sep  8 12:00:19 cfgmgr(ap): wlan_handle_load_event - Acquired Lock
Sep  8 12:00:19 cfgmgr(ap): MAC address is : 00:1a:2a:86:57:2d
Sep  8 12:00:19 cfgmgr(pppoe-106): PPP Received Report Carrier State Event
Sep  8 12:00:19 cfgmgr(pppoe-106): PPPoE Current State = 2
Sep  8 12:00:19 cfgmgr(pppoe-106): del_iptable_rules : ppp_name not intact
Sep  8 12:00:19 cfgmgr(pppoe-106): DSL Line is disconnected....state:2, mode:0
Started pid:98 application: /usr/bin/cm_klogd /dev/klog
Started pid:99 application: /sbin/dproxy -c /etc/dproxy.conf -d
Started pid:100 application: /usr/sbin/brctl addbr br0
Sep  8 12:00:19 TCP: Hash tables configured (established 1024 bind 1024)
Sep  8 12:00:19 : ip_conntrack version 2.0 (128 buckets, 1024 max) - 372 bytes per conntrack
Sep  8 12:00:19 ip_tables: (C) 2000-2002 Netfilter core team
Sep  8 12:00:19 : netfilter PSD loaded - (c) astaro AG
Sep  8 12:00:19 : Initializing the WAN Bridge.
Sep  8 12:00:19 : Please set the MAC Address for the WAN Bridge.
Sep  8 12:00:19 : Set the Environment variable 'wan_br_mac'.
Sep  8 12:00:19 MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
Sep  8 12:00:19 VFS: Mounted root (squashfs filesystem) readonly.
Sep  8 12:00:19 : Mounted devfs on /dev
Sep  8 12:00:19 Freeing unused kernel memory: 60k freed
Sep  8 12:00:19 : Algorithmics/MIPS FPU Emulator v1.5
Sep  8 12:00:19 : registered device TI Avalanche SAR
Sep  8 12:00:19 : Ohio250(7200/7100A2) detected
Sep  8 12:00:19 : DSP binary filesize = 374774 bytes
Sep  8 12:00:19 tn7dsl_init : env var DSL_BIT_TMODE is set
Started pid:102 application: /usr/sbin/snmpd
Sep  8 12:00:19 ERROR DSL: Unable to register with LED module
Sep  8 12:00:19 Texas Instruments ATM driver: version:[7.01.00.10]
Sep  8 12:00:19 : Default Asymmetric MTU for br0 1500
Sep  8 12:00:20 cfgmgr(lanbridge0): Bridge Created: br0
Started pid:105 application: /sbin/ifconfig eth0 up txqueuelen 0
Started pid:106 application: /usr/sbin/wlan/wpa_authenticator
Started pid:107 application: /sbin/ifconfig br0 up txqueuelen 0
Started pid:114 application: /sbin/ifconfig br0 up txqueuelen 0
Started pid:115 application: /usr/sbin/upnpd ppp0 br0
Doing BRCTL ...
setfilter br0 0
Doing BRCTL ...
addif br0 eth0
Sep  8 12:00:21 cfgmgr(ddnsclient): updateall_servers : No children found for conn:
Doing BRCTL ...
stp br0 off
Sep  8 12:00:21 : Bridge Multicasting for br0 is now Enabled.
Started pid:116 application: /usr/sbin/brctl setfilter br0 0
Started pid:118 application: /sbin/ifconfig eth0 0.0.0.0 up txqueuelen 0
Started pid:119 application: /usr/sbin/brctl addif br0 eth0
Started pid:121 application: /sbin/ifconfig br0 192.168.2.1 netmask 255.255.255.0 txqueuelen 100
Started pid:122 application: /usr/sbin/brctl stp br0 off
Started pid:124 application: /sbin/insmod tiap.o
Sep  8 12:00:22 cfgmgr(ap): WPA Authenticator Started
Sep  8 12:00:23 cfgmgr(flan-100): Firewall rule BLOCK all traffic from Any IP added
Sep  8 12:00:23 cfgmgr(lanbridge0): Bridge Interface Added: eth0
Started pid:129 application: /sbin/iptables -N lan-access-ctrl
Doing BRCTL ...
setfilter br0 0
Started pid:135 application: /usr/sbin/udhcpd /var/tmp/udhcpd.conf
Started pid:136 application: /sbin/route add -net 239.0.0.0 netmask 255.0.0.0 metric 1 dev br0
Started pid:137 application: /sbin/ifconfig eth0 0.0.0.0 up txqueuelen 0
Started pid:138 application: /sbin/iptables -I FORWARD -j lan-access-ctrl
Started pid:139 application: /usr/sbin/brctl setfilter br0 0
Started pid:140 application: /sbin/iptables -D antidos-ctrl -i br+ -j antidos-br0
Started pid:141 application: /usr/sbin/upnpd ppp0 br0
Started pid:143 application: /sbin/iptables -D INPUT -i br+ -m state --state NEW -j antidos-ctrl
Started pid:144 application: /sbin/iptables -D FORWARD -i br+ -m state --state NEW -j antidos-ctrl
Started pid:145 application: /sbin/iptables -F antidos-br0
Started pid:146 application: /sbin/iptables -X antidos-br0
Started pid:147 application: /sbin/iptables -t nat -N transparent-proxy
Started pid:148 application: /sbin/iptables -t nat -I PREROUTING -j transparent-proxy
Started pid:149 application: /sbin/iptables -N antidos-ctrl
Started pid:150 application: /sbin/iptables -N access-ctrl
Started pid:151 application: /sbin/iptables -I lan-access-ctrl -j access-ctrl
Started pid:152 application: /sbin/iptables -N mac-filtering
Started pid:153 application: /sbin/iptables -A mac-filtering -i br+ -j DROP
Sep  8 12:00:30 : Default Asymmetric MTU for wlan0 1500
Sep  8 12:00:30 : Default Asymmetric MTU for wdsup0 1500
Sep  8 12:00:30 : Default Asymmetric MTU for wdsdw0 1500
Sep  8 12:00:30 : Default Asymmetric MTU for wdsdw1 1500
Sep  8 12:00:30 : Default Asymmetric MTU for wdsdw2 1500
Sep  8 12:00:30 : Default Asymmetric MTU for wdsdw3 1500
Sep  8 12:00:30 cfgmgr(ap): EEPROM len 473
Sep  8 12:00:30 cfgmgr(ap): Set PIL mode (1)
Sep  8 12:00:30 cfgmgr(ap): AP Driver configuration successful
Sep  8 12:00:38 cfgmgr(ap): AP IS UP
Started pid:158 application: /sbin/ifconfig wlan0 up txqueuelen 0
Sep  8 12:00:38 cfgmgr(ap): AP Releasing Lock
Sep  8 12:00:38 initTnetwAddr: MemAddr=0xa4000000, RegAddr=0xa4080000
Doing BRCTL ...
addif br0 wlan0
TCA_SET: layer2trusted wlan0
Started pid:184 application: /usr/sbin/brctl addif br0 wlan0
Sep  8 12:00:40 cfgmgr(sar): DSL Carrier is down
Sep  8 12:00:40 cfgmgr(pppoe-106): PPP Received Report Carrier State Event
Sep  8 12:00:40 cfgmgr(pppoe-106): PPPoE Current State = 2
Sep  8 12:00:40 cfgmgr(pppoe-106): del_iptable_rules : ppp_name not intact
Sep  8 12:00:40 cfgmgr(pppoe-106): DSL Line is disconnected....state:2, mode:0
Sep  8 12:00:40 : Trusted PIL mode is set
Sep  8 12:00:40 311: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x58f0 Data 0x8
Sep  8 12:00:40 311: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x58d4 Data 0x10
Sep  8 12:00:40 311: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x58b0 Data 0x4
Sep  8 12:00:40 311: whal_hwCtrl_ProcessEepromBR : CurrEepromBufPtr = 0xc
Sep  8 12:00:40 311: whal_hwCtrl_GetNvsDataSize: eepromImage.len = 0x1d9 311: Get NVS file information: NvsDataLen = 0x134 tblsOffset 0xa9
Sep  8 12:00:40 311: whal_acxProcInitiate: Cpu halt -} download code
Sep  8 12:00:40 311: whal_acxProcLoadFwImage: 0xa4000000, 0x0
Started pid:186 application: /sbin/ifconfig wlan0 0.0.0.0 up txqueuelen 0
Sep  8 12:00:40 311: whal_acxProcLoadFwImage() -- Loading FW image
Sep  8 12:00:40 311: Compiled for DCR radio
Sep  8 12:00:40 311: whal_acxProcLoadFwImage: 1, pBuf=0xc00af0c0, len=0x14b50. Extra pBuf=0x0, len=0x0
Sep  8 12:00:40 311: whal_acxProcLoadFwImage: 2, pBuf=0xc00af0c0, len=0x14b50. Extra pBuf=0x0, len=0x0
Sep  8 12:00:40 311: whal_acxProcLoadFwImage: 3, pBuf=0xc00af0c0, len=0x14b50, DataLen=0x14b48
Sep  8 12:00:40 312: whal_acxProcLoadFwImage: 4, pBuf=0xc00af0c0, len=0x14b50
Sep  8 12:00:40 312: whal_acxProcLoadFwImage: Checksum, calc=0x6dc2a3, file=0x6dc2a3
Sep  8 12:00:40 383: ACS: Channel From DB (after reg domain constraints):      11
Sep  8 12:00:40 383: ACS: Active Channel (the best one according to regulatory domain): 2
Sep  8 12:00:40 386: WDRV_MAINSM: Scan still in process......
Sep  8 12:00:40 386: WDRV_4X: 4x Enabled386: WDRV_4X: Concatenation Enabled
Sep  8 12:00:40 386: WDRV_4X: Ack Emulation Disabled
Sep  8 12:00:40 386: whal_apiStartBss: Enable Tx, Rx and Start the Bss
Sep  8 12:00:40 386: ----------------------------------------------------------------
Sep  8 12:00:40 386: ----------------------------------------------------------------
Sep  8 12:00:40 386:   START BSS, SSID=AIRTIES_RT-205, BSSID=00-1A-2A-86-57-2D
Sep  8 12:00:40 386: ----------------------------------------------------------------
Sep  8 12:00:40 386: ----------------------------------------------------------------
Sep  8 12:00:40 386:  AP Power Level = 1
Sep  8 12:00:40 386:  Regulatory Domain = ETSI
Sep  8 12:00:40 386:           Net[0] : Channel=11
Sep  8 12:00:40 386: ----------------------------------------------------------------
Sep  8 12:00:40 387: FW Watchdog is Enabled
Sep  8 12:00:40 cfgmgr(lanbridge0): Bridge Interface Added: wlan0
Started pid:191 application: /sbin/ifconfig wlan0 0.0.0.0 up txqueuelen 0
Doing BRCTL ...
setfilter br0 0
Started pid:197 application: /usr/sbin/brctl setfilter br0 0
Started pid:199 application: /usr/sbin/udhcpd /var/tmp/udhcpd.conf
Started pid:211 application: /sbin/iptables -I INPUT 1 -p tcp --dport 80 -s 192.168.2.2 -j CFG
Sep  8 12:02:10 cfgmgr(sar): DSL Carrier is training
Sep  8 12:02:10 cfgmgr(pppoe-106): PPP Received Report Carrier State Event
Sep  8 12:02:10 cfgmgr(pppoe-106): PPPoE Current State = 2
Sep  8 12:02:10 cfgmgr(pppoe-106): del_iptable_rules : ppp_name not intact
Sep  8 12:02:10 cfgmgr(pppoe-106): DSL Line is disconnected....state:2, mode:0
Sep  8 12:03:50 cfgmgr(sar): DSL Carrier is training
Sep  8 12:03:50 cfgmgr(pppoe-106): PPP Received Report Carrier State Event
Sep  8 12:03:50 cfgmgr(pppoe-106): PPPoE Current State = 2
Sep  8 12:03:50 cfgmgr(pppoe-106): del_iptable_rules : ppp_name not intact
Sep  8 12:03:50 cfgmgr(pppoe-106): DSL Line is disconnected....state:2, mode:0
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12067
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: Airties RT-205

Post by thechief » Tue Dec 12, 2017 11:06 am

*** FATAL ERROR. Use PC App now. ***
You have your answer there. Use the PCTool to upgrade your firmware. It seems that there are errors in your current firmware's (all the errors being thrown up by cm_logic). Tread with care. I am surprised that the router is not bricked, because cm_logic dies very easily when it encounters errors. The errors might possibly be cured by hard resetting the router to factory defaults.
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
Tromick
Newbie
Newbie
Posts: 8
Joined: Mon Aug 14, 2017 8:40 pm

Re: Airties RT-205

Post by Tromick » Tue Dec 12, 2017 6:39 pm

thechief wrote:
*** FATAL ERROR. Use PC App now. ***
You have your answer there. Use the PCTool to upgrade your firmware. It seems that there are errors in your current firmware's (all the errors being thrown up by cm_logic). Tread with care. I am surprised that the router is not bricked, because cm_logic dies very easily when it encounters errors. The errors might possibly be cured by hard resetting the router to factory defaults.
I tried everything. I think it's not possible without that PC App thing. Thats why i can't flash a firmware. Cuz access denied to files. "tftp:timeout" after that it's restarting. No new files writed, every files is locked. The reason i don't get be bricked is this. This is what i think sir! (By the way, sorry for my English!)
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12067
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: Airties RT-205

Post by thechief » Tue Dec 12, 2017 7:31 pm

Tromick wrote:I tried everything. I think it's not possible without that PC App thing. Thats why i can't flash a firmware. Cuz access denied to files. "tftp:timeout" after that it's restarting. No new files writed, every files is locked. The reason i don't get be bricked is this. This is what i think sir! (By the way, sorry for my English!)
You don't need any software to do a hard reset. There should be a reset button on your router.

What is wrong with using the PCTool (aka PC App) ?
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
Tromick
Newbie
Newbie
Posts: 8
Joined: Mon Aug 14, 2017 8:40 pm

Re: Airties RT-205

Post by Tromick » Thu Dec 14, 2017 5:02 pm

thechief wrote:
Tromick wrote:I tried everything. I think it's not possible without that PC App thing. Thats why i can't flash a firmware. Cuz access denied to files. "tftp:timeout" after that it's restarting. No new files writed, every files is locked. The reason i don't get be bricked is this. This is what i think sir! (By the way, sorry for my English!)
You don't need any software to do a hard reset. There should be a reset button on your router.

What is wrong with using the PCTool (aka PC App) ?
Yes it has reset button. When you hold it 6 sec. Its resets. But it doesn't help. Still same error.
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12067
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: Airties RT-205

Post by thechief » Fri Dec 15, 2017 1:18 pm

Tromick wrote:Yes it has reset button. When you hold it 6 sec. Its resets. But it doesn't help. Still same error.
I don't think 6 seconds is enough. You need to hold it down until it reboot-cycles at least 3 or 4 times (i.e., hold it down for nearly a minute).
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
Tromick
Newbie
Newbie
Posts: 8
Joined: Mon Aug 14, 2017 8:40 pm

Re: Airties RT-205

Post by Tromick » Fri Dec 15, 2017 2:27 pm

thechief wrote:
Tromick wrote:Yes it has reset button. When you hold it 6 sec. Its resets. But it doesn't help. Still same error.
I don't think 6 seconds is enough. You need to hold it down until it reboot-cycles at least 3 or 4 times (i.e., hold it down for nearly a minute).
I count for you. It needs only ten seconds. When i holding 45secs or 1min, nothing happen. I made 3 times reset. After that this time i tried update firmware from 192.168.2.1 modem restarted and again still same version... I think its locked. No way to update without that PC App. And im sure only Airties have it.
User avatar
thechief
RouterTech Team
RouterTech Team
Posts: 12067
Joined: Wed Feb 01, 2006 10:22 pm
Location: England, the Centre of Africa
Contact:

Re: Airties RT-205

Post by thechief » Fri Dec 15, 2017 2:57 pm

Tromick wrote:I count for you. It needs only ten seconds. When i holding 45secs or 1min, nothing happen. I made 3 times reset. After that this time i tried update firmware from 192.168.2.1 modem restarted and again still same version... I think its locked. No way to update without that PC App. And im sure only Airties have it.
Everything you need is here: viewtopic.php?t=335
The Chief: :afro: Be sure to read the Firmware FAQ and do a Forum Search before posting!
No support via PM. Ask all questions on the open forum.
Tromick
Newbie
Newbie
Posts: 8
Joined: Mon Aug 14, 2017 8:40 pm

Re: Airties RT-205

Post by Tromick » Sun Dec 17, 2017 5:50 pm

thechief wrote:
Tromick wrote:I count for you. It needs only ten seconds. When i holding 45secs or 1min, nothing happen. I made 3 times reset. After that this time i tried update firmware from 192.168.2.1 modem restarted and again still same version... I think its locked. No way to update without that PC App. And im sure only Airties have it.
Everything you need is here: viewtopic.php?t=335
These programs doesn't let me to do anything.
Post Reply