help for REPOTEK RP-IP1800

All about firmwares for routers. Support for RouterTech firmwares is here too.
Post Reply
amino1986
Novice
Novice
Posts: 24
Joined: Tue Jun 27, 2006 1:30 am

help for REPOTEK RP-IP1800

Post by amino1986 » Tue Jun 27, 2006 11:27 am

this router is very good but it has not a firewall built-in?is there anyway to overcome this?is there any firmware to add this option..i tried installing new firmware from repotek called RP-IP1800v3 but it has not this option too...the router is conexant based so can i use other versions of conexant firmware made for other brands?

router information:
home page:http://www.repotec.com/broadband_router/RP_IP1800v2.htm
BootCode Version: BC_CX82xxx_4.1.0.28
Firmware Version: CX82xxx_4.1.0.29
Customer Software Version: 4.1.0.29c

thnx to u all
User avatar
eMuNiX
Ex RouterTech Team
Ex RouterTech Team
Posts: 901
Joined: Sat Jan 28, 2006 9:02 am
Contact:

Post by eMuNiX » Tue Jun 27, 2006 11:29 am

Try the JMK firmware from viewtopic.php?t=33 this has SPI firewall and should be okay in your router. Be sure to read the whole thread should the flash go wrong and you need to rescue the router.
Image
seeker
Novice
Novice
Posts: 31
Joined: Sun Jun 25, 2006 11:57 am

it will works ..

Post by seeker » Tue Jun 27, 2006 11:31 am

I think the Firmware will work like it worked on my router ..as long as it's conexant based with CX82310 ADSL chip ..
amino1986
Novice
Novice
Posts: 24
Joined: Tue Jun 27, 2006 1:30 am

Post by amino1986 » Tue Jun 27, 2006 11:40 am

thnx u all....i read the topic about JMK firmware and i will try to install it..thnx again
Post Reply